May 10, 2001

                   onl50t:  Solaris8 cc ドライバのテスト.

                      Solaris8 システムのインストール
                         ---  VMEドライバのインストール#03
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  (http://www-online.kek.jp/~inoue/CAMAC/onl50t-sol8/
                                   Desktop/vme-step01.txt)



                        高エネルギー加速器研究機構
                            素粒子原子核研究所
                         物理、オンライングループ
                                井上 栄二


 (1).   現状確認

        (A). Solaris8 6/00 が届いた。
        (B). "SOLARIS 8 INSTALLATION 6/00" でインストール時にエラー。
        (C). "SOLARIS 8 SOFTWARE 1,2" のメディアを使ってインストールした。
             インストール時の指定ミスにより、"couldn't set locale correctly"の
             メッセージがブート時等にコンソールに表示されてしまう。
        (D). "SOLARIS 8 SOFTWARE 1,2" のメディアを使って再インストールした。
        (E). /etc の下の各設定、および /export/home の作成をやった。


 (2).   ここでやるべきこと
	
	CPU-50T に Solaris8用の VMEドライバ、FRCvme-2.5 をインストールする。


 (3).   FRCvme をインストールする

   (3-1).  pkginfo を実行して、現在インストールされているFRCvme をチェック。

onl50t[39]% pwd
/export/home/onl50t/inoue/VME-Driver/FRCdrv-2.10
onl50t[40]% ls -l
total 6584
-rw-r--r--   1 inoue    kek      3260697 Apr 13 14:22 FRCdrv-2.10.pkg.tar.gz
-rw-r--r--   1 inoue    kek        94091 Apr 13 14:22 FRCdrv-2.10rel.pdf
onl50t[41]% gzip -d FRCdrv-2.10.pkg.tar.gz
onl50t[42]% ls -l
total 24120
-rw-r--r--   1 inoue    kek      12239360 Mar 21 01:45 FRCdrv-2.10.pkg.tar
-rw-r--r--   1 inoue    kek        94091 Apr 13 14:22 FRCdrv-2.10rel.pdf
onl50t[43]% tar xvf FRCdrv-2.10.pkg.tar
x FRCdrv-2.10.pkg, 12237824 bytes, 23902 tape blocks
onl50t[44]% ls -l
total 48040
-rw-r--r--   1 inoue    kek      12237824 Mar 21 00:30 FRCdrv-2.10.pkg
-rw-r--r--   1 inoue    kek      12239360 Mar 21 01:45 FRCdrv-2.10.pkg.tar
-rw-r--r--   1 inoue    kek        94091 Apr 13 14:22 FRCdrv-2.10rel.pdf
onl50t[45]% 

onl50t[45]% pwd
/export/home/onl50t/inoue/VME-Driver/FRCdrv-2.10
onl50t[46]% pkginfo -l FRCvme
ERROR: information for "FRCvme" was not found
onl50t[47]% 


   (3-2).  pkgadd を実行して、FRCvme をインストールする。

onl50t# pwd
/export/home/onl50t/inoue/VME-Driver/FRCdrv-2.10
onl50t# ls -l
total 48040
-rw-r--r--   1 inoue    kek      12237824 Mar 21 00:30 FRCdrv-2.10.pkg
-rw-r--r--   1 inoue    kek      12239360 Mar 21 01:45 FRCdrv-2.10.pkg.tar
-rw-r--r--   1 inoue    kek        94091 Apr 13 14:22 FRCdrv-2.10rel.pdf
onl50t# pkgadd -d FRCdrv-2.10.pkg

The following packages are available:
  1  FRCcpci      Drivers for Sentinel(tm) PCI/CompactPCI(R) Bridge
                  (sparcv9) V1.0
  2  FRCctrl      FORCE sysconfig driver
                  (sparcv9) V1.3
  3  FRCflash     Flash Memory Driver
                  (sparcv9) V1.2.1
  4  FRCglm       SCSI HBA Driver for Symbios 53C895/A
                  (sparc) V1.0
  5  FRCiprb      Ethernet Driver for Intel 82558/9
                  (sparc) V1.1
  6  FRCkmod      UltraSPARC-IIi kernel module
                  (sparcv9) 1.0.2
  7  FRCvme       FORCE VMEbus Drivers
                  (sparcv9) V2.5

Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:

Processing package instance <FRCcpci> from </export/home/onl50t/inoue/VME-Driver
/FRCdrv-2.10/FRCdrv-2.10.pkg>

Drivers for Sentinel(tm) PCI/CompactPCI(R) Bridge
(sparcv9) V1.0
Copyright Force Computers 2000
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   3 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

The following files are being installed with setuid and/or setgid
permissions:
 /opt/FRCcpci/bin/sparc/cfgtool <setgid sys>
 /opt/FRCcpci/bin/sparc/devdump <setgid sys>
 /opt/FRCcpci/bin/sparcv9/cfgtool <setgid sys>
 /opt/FRCcpci/bin/sparcv9/devdump <setgid sys>

Do you want to install these as setuid/setgid files [y,n,?,q] y

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <FRCcpci> [y,n,?] y

Installing Drivers for Sentinel(tm) PCI/CompactPCI(R) Bridge as <FRCcpci>

## Installing part 1 of 1.
/opt/FRCcpci/README
/opt/FRCcpci/bin/bus_dump
/opt/FRCcpci/bin/cfgtool
/opt/FRCcpci/bin/devdump
/opt/FRCcpci/bin/mbox
/opt/FRCcpci/bin/mbox_send
/opt/FRCcpci/bin/msi
/opt/FRCcpci/bin/msi_send
/opt/FRCcpci/bin/pciinfo
/opt/FRCcpci/bin/shmem
/opt/FRCcpci/bin/snconfig
/opt/FRCcpci/bin/sparc/cfgtool
/opt/FRCcpci/bin/sparc/devdump
/opt/FRCcpci/bin/sparc/snconfig
/opt/FRCcpci/bin/sparcv9/cfgtool
/opt/FRCcpci/bin/sparcv9/devdump
/opt/FRCcpci/bin/sparcv9/snconfig
/opt/FRCcpci/conf/fcpci.conf
/opt/FRCcpci/conf/frcsn.conf
/opt/FRCcpci/conf/pcicfg.conf
/opt/FRCcpci/examples/fcpci.c
/opt/FRCcpci/examples/mbox.c
/opt/FRCcpci/examples/mbox_send.c
/opt/FRCcpci/examples/msi.c
/opt/FRCcpci/examples/msi_send.c
/opt/FRCcpci/examples/pciinfo.c
/opt/FRCcpci/examples/shmem.c
/opt/FRCcpci/sunos57/fcpci
/opt/FRCcpci/sunos57/frcsn
/opt/FRCcpci/sunos57/pcicfg
/opt/FRCcpci/sunos57/sparcv9/fcpci
/opt/FRCcpci/sunos57/sparcv9/frcsn
/opt/FRCcpci/sunos57/sparcv9/pcicfg
/opt/FRCcpci/sunos57_pl12/fcpci
/opt/FRCcpci/sunos57_pl12/frcsn
/opt/FRCcpci/sunos57_pl12/pcicfg
/opt/FRCcpci/sunos57_pl12/sparcv9/fcpci
/opt/FRCcpci/sunos57_pl12/sparcv9/frcsn
/opt/FRCcpci/sunos57_pl12/sparcv9/pcicfg
/opt/FRCcpci/sunos58/fcpci
/opt/FRCcpci/sunos58/frcsn
/opt/FRCcpci/sunos58/pcicfg
/opt/FRCcpci/sunos58/sparcv9/fcpci
/opt/FRCcpci/sunos58/sparcv9/frcsn
/opt/FRCcpci/sunos58/sparcv9/pcicfg
/opt/FRCcpci/sys/fcpci.h
/opt/FRCcpci/sys/fcpci_vars.h
/opt/FRCcpci/sys/sddi.h
/opt/FRCcpci/sys/sddi_stubs.c
[ verifying class <base> ]
## Executing postinstall script.
Installing drivers...
Installing //frcsn
Installing /sparcv9/frcsn
Installing //fcpci
Installing /sparcv9/fcpci
Installing //pcicfg
Installing /sparcv9/pcicfg
Installing conf/frcsn.conf
Installing conf/fcpci.conf
Installing conf/pcicfg.conf
Modifying //etc/devlink.tab
devfsadm: driver failed to attach: frcsn
Warning: Driver (frcsn) successfully added to system but failed to attach
devfsadm: driver failed to attach: fcpci
Warning: Driver (fcpci) successfully added to system but failed to attach
devfsadm: driver failed to attach: pcicfg
Warning: Driver (pcicfg) successfully added to system but failed to attach

Installation of <FRCcpci> was successful.

Processing package instance <FRCctrl> from </export/home/onl50t/inoue/VME-Driver
/FRCdrv-2.10/FRCdrv-2.10.pkg>

FORCE sysconfig driver
(sparcv9) V1.3
Copyright FORCE COMPUTERS 1996,1997,1998
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   4 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <FRCctrl> [y,n,?] y

Installing FORCE sysconfig driver as <FRCctrl>

## Installing part 1 of 1.
/kernel/drv/sparcv9/sysconfig
/kernel/drv/sysconfig
/kernel/drv/sysconfig.conf
/opt/FRCctrl/examples/frceject
/opt/FRCctrl/examples/ledctl
/opt/FRCctrl/examples/ledctl.c
/opt/FRCctrl/examples/read_values
/opt/FRCctrl/examples/tempctl
/opt/FRCctrl/examples/tempctl.c
/opt/FRCctrl/kernel/drv/sparcv9/sysconfig
/opt/FRCctrl/kernel/drv/sysconfig
/opt/FRCctrl/kernel/drv/sysconfig.conf
/opt/FRCctrl/man/man7/sysconfig.7d
/opt/FRCctrl/sys/sysconfig_if.h
[ verifying class <none> ]
## Executing postinstall script.
modifying //etc/devlink.tab

Installation of <FRCctrl> was successful.

Processing package instance <FRCflash> from </export/home/onl50t/inoue/VME-Drive
r/FRCdrv-2.10/FRCdrv-2.10.pkg>

Flash Memory Driver
(sparcv9) V1.2.1
Copyright FORCE COMPUTERS 1996-2000

Do you want to install the complete package? y

Installing the following classes: base targ sysfile

Hardware: FORCE,CPU-50
Using configuration file <flash-memory.50_520.conf>
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   9 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <FRCflash> [y,n,?] y

Installing Flash Memory Driver as <FRCflash>

## Installing part 1 of 1.
/opt/FRCflash/conf/flash-memory.10.conf
/opt/FRCflash/conf/flash-memory.20VTe.conf
/opt/FRCflash/conf/flash-memory.24VT.conf
/opt/FRCflash/conf/flash-memory.3CE.conf
/opt/FRCflash/conf/flash-memory.50_520.conf
/opt/FRCflash/conf/flash-memory.54_540.conf
/opt/FRCflash/conf/flash-memory.5CE.conf
/opt/FRCflash/conf/flash-memory.5TE.conf
/opt/FRCflash/conf/flash-memory.5V.conf
/opt/FRCflash/conf/flash-memory.5VT.conf
/opt/FRCflash/conf/flash-memory.7V.conf
/opt/FRCflash/conf/flash-memory.8VT.conf
/opt/FRCflash/examples/flash-reconfigure
/opt/FRCflash/examples/fldump
/opt/FRCflash/examples/fldump.c
/opt/FRCflash/examples/flerase
/opt/FRCflash/examples/flerase.c
/opt/FRCflash/examples/flinfo
/opt/FRCflash/examples/flinfo.c
/opt/FRCflash/examples/flread
/opt/FRCflash/examples/flread.c
/opt/FRCflash/examples/flwrite
/opt/FRCflash/examples/flwrite.c
/opt/FRCflash/man/man7d/flash-memory.7d
/opt/FRCflash/platform/sun4m/kernel/drv/flash-memory
/opt/FRCflash/platform/sun4u/kernel/drv/flash-memory
/opt/FRCflash/platform/sun4u/kernel/drv/sparcv9/flash-memory
/opt/FRCflash/sys/flash.h
[ verifying class <base> ]
/platform/sun4m/kernel/drv/flash-memory
/platform/sun4u/kernel/drv/flash-memory
/platform/sun4u/kernel/drv/sparcv9/flash-memory
[ verifying class <targ> ]
/usr/include/sys/flash.h
[ verifying class <sysfile> ]
## Executing postinstall script.
Installing driver...

Modifying //etc/devlink.tab and adding driver.
devfsadm: driver failed to attach: flash-memory
Warning: Driver (flash-memory) successfully added to system but failed to attach

NOTICE: The boot- and/or the user flash device nodes have not been created.
This could mean that the hardware write-protection is enabled. Write
protection must be disabled in order to use the flash-memory driver.

Power down the system, verify that the write protection switches for user-
and/or boot flash devices are set to the "on" position and re-boot the
system in reconfigure mode ("boot -r" from the firmware "ok" prompt).


Installation of <FRCflash> was successful.

Processing package instance <FRCglm> from </export/home/onl50t/inoue/VME-Driver/
FRCdrv-2.10/FRCdrv-2.10.pkg>

SCSI HBA Driver for Symbios 53C895/A
(sparc) V1.0
FORCE COMPUTERS GmbH
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   4 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <FRCglm> [y,n,?] y

Installing SCSI HBA Driver for Symbios 53C895/A as <FRCglm>

## Installing part 1 of 1.
/kernel/drv/frcglm
/kernel/drv/frcglm.conf
/kernel/drv/sparcv9/frcglm
/opt/FRCglm/README
[ verifying class <none> ]
## Executing postinstall script.
Loading driver...
devfsadm: driver failed to attach: frcglm
Warning: Driver (frcglm) successfully added to system but failed to attach

Installation of <FRCglm> was successful.

Processing package instance <FRCiprb> from </export/home/onl50t/inoue/VME-Driver
/FRCdrv-2.10/FRCdrv-2.10.pkg>

Ethernet Driver for Intel 82558/9
(sparc) V1.1
FORCE COMPUTERS GmbH
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   4 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <FRCiprb> [y,n,?] y

Installing Ethernet Driver for Intel 82558/9 as <FRCiprb>

## Installing part 1 of 1.
/kernel/drv/fciprb
/kernel/drv/fciprb.conf
/kernel/drv/sparcv9/fciprb
/opt/FRCiprb/README
[ verifying class <none> ]
## Executing postinstall script.
Loading driver...
devfsadm: driver failed to attach: fciprb
Warning: Driver (fciprb) successfully added to system but failed to attach

NOTE: Please consult //opt/FRCiprb/README for information not contained in the
      printed documentation.

Installation of <FRCiprb> was successful.

Processing package instance <FRCkmod> from </export/home/onl50t/inoue/VME-Driver
/FRCdrv-2.10/FRCdrv-2.10.pkg>

UltraSPARC-IIi kernel module
(sparcv9) 1.0.2
Copyright FORCE COMPUTERS 1998
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   1 package pathname is already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <FRCkmod> [y,n,?] y

Installing UltraSPARC-IIi kernel module as <FRCkmod>

## Executing preinstall script.
Target OS: VERSION=8
Operating system not supported: VERSION=8
pkgadd: ERROR: preinstall script did not complete successfully

Installation of <FRCkmod> failed.

There is 1 more package to be installed.

Do you want to continue with installation [y,n,?] y

Processing package instance <FRCvme> from </export/home/onl50t/inoue/VME-Driver/
FRCdrv-2.10/FRCdrv-2.10.pkg>

FORCE VMEbus Drivers
(sparcv9) V2.5
Copyright FORCE COMPUTERS 1996-1999

Installing the following classes: base targ sysfile

Hardware: FORCE,CPU-50
Target OS: SunOS_5_8

Do you want to disable the mcp serial drivers? y [y,n,?] y
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   15 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.

The following files are already installed on the system and are being
used by another package:
  /opt/FRCvme <attribute change only>

Do you want to install these conflicting files [y,n,?,q] y
## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user
permission during the process of installing this package.

Do you want to continue with the installation of <FRCvme> [y,n,?] y

Installing FORCE VMEbus Drivers as <FRCvme>

## Installing part 1 of 1.
/opt/FRCvme/README
/opt/FRCvme/SunOS_5_5/platform/sun4m/kernel/drv/VME_fga5000
/opt/FRCvme/SunOS_5_5/platform/sun4m/kernel/drv/VME_s4
/opt/FRCvme/SunOS_5_5/platform/sun4m/kernel/drv/verbose/VME_fga5000
/opt/FRCvme/SunOS_5_5/platform/sun4m/kernel/drv/verbose/VME_s4
/opt/FRCvme/SunOS_5_5_1/platform/sun4m/kernel/drv/VME_fga5000
/opt/FRCvme/SunOS_5_5_1/platform/sun4m/kernel/drv/VME_s4
/opt/FRCvme/SunOS_5_5_1/platform/sun4m/kernel/drv/verbose/VME_fga5000
/opt/FRCvme/SunOS_5_5_1/platform/sun4m/kernel/drv/verbose/VME_s4
/opt/FRCvme/SunOS_5_5_1/platform/sun4u/kernel/drv/VME_universe
/opt/FRCvme/SunOS_5_5_1/platform/sun4u/kernel/drv/verbose/VME_universe
/opt/FRCvme/SunOS_5_6/platform/sun4m/kernel/drv/VME_fga5000
/opt/FRCvme/SunOS_5_6/platform/sun4m/kernel/drv/VME_s4
/opt/FRCvme/SunOS_5_6/platform/sun4m/kernel/drv/verbose/VME_fga5000
/opt/FRCvme/SunOS_5_6/platform/sun4m/kernel/drv/verbose/VME_s4
/opt/FRCvme/SunOS_5_6/platform/sun4u/kernel/drv/VME_universe
/opt/FRCvme/SunOS_5_6/platform/sun4u/kernel/drv/verbose/VME_universe
/opt/FRCvme/SunOS_5_7/platform/sun4m/kernel/drv/VME_fga5000
/opt/FRCvme/SunOS_5_7/platform/sun4m/kernel/drv/VME_s4
/opt/FRCvme/SunOS_5_7/platform/sun4m/kernel/drv/verbose/VME_fga5000
/opt/FRCvme/SunOS_5_7/platform/sun4m/kernel/drv/verbose/VME_s4
/opt/FRCvme/SunOS_5_7/platform/sun4u/kernel/drv/VME_universe
/opt/FRCvme/SunOS_5_7/platform/sun4u/kernel/drv/sparcv9/VME_universe
/opt/FRCvme/SunOS_5_7/platform/sun4u/kernel/drv/sparcv9/verbose/VME_universe
/opt/FRCvme/SunOS_5_7/platform/sun4u/kernel/drv/verbose/VME_universe
/opt/FRCvme/SunOS_5_8/platform/sun4m/kernel/drv/VME_fga5000
/opt/FRCvme/SunOS_5_8/platform/sun4m/kernel/drv/VME_s4
/opt/FRCvme/SunOS_5_8/platform/sun4m/kernel/drv/verbose/VME_fga5000
/opt/FRCvme/SunOS_5_8/platform/sun4m/kernel/drv/verbose/VME_s4
/opt/FRCvme/SunOS_5_8/platform/sun4u/kernel/drv/VME_universe
/opt/FRCvme/SunOS_5_8/platform/sun4u/kernel/drv/sparcv9/VME_universe
/opt/FRCvme/SunOS_5_8/platform/sun4u/kernel/drv/sparcv9/verbose/VME_universe
/opt/FRCvme/SunOS_5_8/platform/sun4u/kernel/drv/verbose/VME_universe
/opt/FRCvme/bin/instvme
/opt/FRCvme/drv/common/common.c
/opt/FRCvme/drv/vmectl/Makefile
/opt/FRCvme/drv/vmectl/vmectl.c
/opt/FRCvme/drv/vmedma/Makefile
/opt/FRCvme/drv/vmedma/vmedma.c
/opt/FRCvme/drv/vmedvma/Makefile
/opt/FRCvme/drv/vmedvma/vmedvma.c
/opt/FRCvme/drv/vmefdma/Makefile
/opt/FRCvme/drv/vmefdma/vmefdma.c
/opt/FRCvme/drv/vmeplus/Makefile
/opt/FRCvme/drv/vmeplus/sparcv8/safe_write.o
/opt/FRCvme/drv/vmeplus/sparcv9/safe_write.o
/opt/FRCvme/drv/vmeplus/vmeplus.c
/opt/FRCvme/examples/Makefile
/opt/FRCvme/examples/README
/opt/FRCvme/examples/bconfig
/opt/FRCvme/examples/bconfig.c
/opt/FRCvme/examples/errorcount
/opt/FRCvme/examples/errorcount.c
/opt/FRCvme/examples/mailbox
/opt/FRCvme/examples/mailbox.c
/opt/FRCvme/examples/sevenseg
/opt/FRCvme/examples/sevenseg.c
/opt/FRCvme/examples/shmem
/opt/FRCvme/examples/shmem.c
/opt/FRCvme/examples/vme_dump
/opt/FRCvme/examples/vme_dump.c
/opt/FRCvme/examples/vmecp
/opt/FRCvme/examples/vmecp.c
/opt/FRCvme/kernel/drv/VME.conf
/opt/FRCvme/kernel/drv/sparcv9/vmectl
/opt/FRCvme/kernel/drv/sparcv9/vmedma
/opt/FRCvme/kernel/drv/sparcv9/vmedvma
/opt/FRCvme/kernel/drv/sparcv9/vmefdma
/opt/FRCvme/kernel/drv/sparcv9/vmeplus
/opt/FRCvme/kernel/drv/vmectl
/opt/FRCvme/kernel/drv/vmectl.conf
/opt/FRCvme/kernel/drv/vmedma
/opt/FRCvme/kernel/drv/vmedma.conf
/opt/FRCvme/kernel/drv/vmedvma
/opt/FRCvme/kernel/drv/vmedvma.conf
/opt/FRCvme/kernel/drv/vmefdma
/opt/FRCvme/kernel/drv/vmefdma.conf
/opt/FRCvme/kernel/drv/vmeplus
/opt/FRCvme/kernel/drv/vmeplus.conf
/opt/FRCvme/sys/common.h
/opt/FRCvme/sys/fga5000.h
/opt/FRCvme/sys/s4.h
/opt/FRCvme/sys/universe.h
/opt/FRCvme/sys/vdi.h
/opt/FRCvme/sys/vdi_types.h
/opt/FRCvme/sys/vhi_types.h
/opt/FRCvme/sys/vme.h
/opt/FRCvme/sys/vme_debug.h
/opt/FRCvme/sys/vme_types.h
/opt/FRCvme/sys/vui.h
/opt/FRCvme/usr/lib/libvui.a
/opt/FRCvme/usr/lib/sparcv9/libvui.a
/opt/FRCvme/vui/Makefile
/opt/FRCvme/vui/libvui.c
[ verifying class <base> ]
/kernel/drv/sparcv9/vmectl
/kernel/drv/sparcv9/vmedma
/kernel/drv/sparcv9/vmedvma
/kernel/drv/sparcv9/vmefdma
/kernel/drv/sparcv9/vmeplus
/kernel/drv/vmectl
/kernel/drv/vmectl.conf
/kernel/drv/vmedma
/kernel/drv/vmedma.conf
/kernel/drv/vmedvma
/kernel/drv/vmedvma.conf
/kernel/drv/vmefdma
/kernel/drv/vmefdma.conf
/kernel/drv/vmeplus
/kernel/drv/vmeplus.conf
[ verifying class <targ> ]
/usr/include/sys/fga5000.h
/usr/include/sys/s4.h
/usr/include/sys/universe.h
/usr/include/sys/vdi.h
/usr/include/sys/vdi_types.h
/usr/include/sys/vhi_types.h
/usr/include/sys/vme.h
/usr/include/sys/vme_debug.h
/usr/include/sys/vme_types.h
/usr/include/sys/vui.h
/usr/lib/libvui.a
/usr/lib/sparcv9/libvui.a
[ verifying class <sysfile> ]
## Executing postinstall script.
Disabling mcp driver in //etc/system
Installing drivers...
Installing /var/tmp/dstreAAAbwaOQb/FRCvme/reloc/opt/FRCvme/SunOS_5_8/platform/su
n4u/kernel/drv//VME_universe
Installing /var/tmp/dstreAAAbwaOQb/FRCvme/reloc/opt/FRCvme/SunOS_5_8/platform/su
n4u/kernel/drv/sparcv9/VME_universe
Modifying //etc/devlink.tab

NOTE: Please consult //opt/FRCvme/README for notes on the
      following topics:
      o   Recommended Patches for SPARC/CPU-50

NOTE: The mcp serial driver is disabled. To re-enable it, remove the entry
         exclude: drv/mcp
      from etc/system.

Installation of <FRCvme> was successful.
onl50t# 

onl50t[57]% pwd
/opt/FRCvme
onl50t[58]% ls -l
total 30
-rw-r--r--   1 root     sys         1539 Apr  5  2000 README
drwxr-xr-x   3 root     sys          512 May 10 16:03 SunOS_5_5/
drwxr-xr-x   3 root     sys          512 May 10 16:03 SunOS_5_5_1/
drwxr-xr-x   3 root     sys          512 May 10 16:03 SunOS_5_6/
drwxr-xr-x   3 root     sys          512 May 10 16:03 SunOS_5_7/
drwxr-xr-x   3 root     sys          512 May 10 16:03 SunOS_5_8/
drwxr-xr-x   2 root     sys          512 May 10 16:03 bin/
drwxr-xr-x   8 root     sys          512 May 10 16:03 drv/
drwxr-xr-x   2 root     sys          512 May 10 16:03 examples/
drwxr-xr-x   3 root     sys          512 May 10 16:03 kernel/
drwxr-xr-x   4 root     sys          512 May 10 16:03 platform/
drwxr-xr-x   2 root     sys          512 May 10 16:03 sys/
drwxr-xr-x   3 root     sys          512 May 10 16:03 usr/
drwxr-xr-x   2 root     sys          512 May 10 16:03 vui/
onl50t[59]% cat README
o   Recommended Patches for SPARC/CPU-50
    ====================================

    On UltraSPARC based hardware, excessive VMEbus read errors (PCI target
    aborts) caused by block-copy operations (e.g. bcopy) may lead to a kernel
    panic.
    The FRCkmod package provides a fix for this by replacing the UltraSPARC-IIi
    processor kernel module.

    Note 1: For Solaris 2.6 it is a prerequisite that patch 105181-10 has been
            applied before installing the FRCkmod package.

    Note 2: The FRCkmod package is not applicable to Solaris 2.5.1. There is no
            workaround for the described problem except to avoid high rates of
            VME read errors when accessing the VMEbus via mmap().
            For example, data transfers done by using memcpy() will most likely
            panic if the accessed VMEbus address range is invalid.

    Note 3: It cannot be guaranteed that the FRCkmod package is compatible
            with later versions of kernel update patches or whether it can
            be provided for future OS versions.


    Installation
    ------------

    The FRCkmod package and all patches are located in the "patches"
    subdirectory on the installation medium. The patches are also available via
    http://sunsolve.sun.com.

    For patch installation, go into the patch directory (e.g.
    /cdrom/cdrom0/patches/105181-10) and type

    ./installpatch .


    For installation of the FRCkmod package, go into the "patches" directory on
    the CD-ROM and type

    pkgadd -d . FRCkmod
onl50t[60]% 

	ok.   FRCvme のインストールは正常に終了した。

   (3-3).  VMEドライバに対するパッチ

	ここではパッチは当てない。 問題が起ってから考える。


   (3-4).  システムをリブートする

onl50t# /usr/sbin/shutdown -i0 -g0

Shutdown started.    20010510 () 163027 JST

Do you want to continue? (y or n):   y
Changing to init state 0 - please wait
Broadcast Message from root (console) on onl50t ()  5 10 16:30:...
THE SYSTEM onl50t IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged

onl50t#
INIT: New run level: 0
The system is coming down.  Please wait.
System services are now being stopped.
Print services stopped.
May 10 16:30:44 onl50t syslogd: going down on signal 15
The system is down.

INIT: failed write of utmpx entry:"s0"

INIT: failed write of utmpx entry:"fw"
syncing file systems... done
Program terminated
ok 
ok
ok
ok boot -r
Resetting ...


screen not found.
Can't open input device.
Keyboard not present.  Using ttya for input and output.

FORCE,CPU-50(UltraSPARC-IIi 300MHz), No Keyboard
OpenBoot 3.10.8, 256 MB memory installed, Serial #9204337.
Ethernet address 0:80:42:10:2:74, Host ID: 808c7271.



Executing last command: boot -r
Boot device: /pci@1f,0/scsi@4/disk@3,0:a  File and args: -r
SunOS Release 5.8 Version Generic_108528-01 64-bit
Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.
WARNING: Failed to install "power" driver.
configuring IPv4 interfaces: hme0.
configuring IPv6 interfaces: hme0.
Hostname: onl50t
Configuring /dev and /devices
				<----   ここでフリーズしてしまった。 Breakキー
					で中断する。

---xxxx

# /usr/sbin/shutdown -i0 -g0

Shutdown started.    Wed Feb  9 17:50:27 JST 2000

Do you want to continue? (y or n):   y
Changing to init state 0 - please wait
Broadcast Message from root (console) on onl50t Wed Feb  9 17:50:29...
THE SYSTEM onl50t IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged

#
INIT: New run level: 0
The system is coming down.  Please wait.
System services are now being stopped.
Print services stopped.
syslogd: going down on signal 15
umount: /kekfs busy
The system is down.

INIT: failed write of utmpx entry:"s0"

INIT: failed write of utmpx entry:"fw"
syncing file systems... done
Program terminated
ok 
ok boot -r
Resetting ...


screen not found.
Can't open input device.
Keyboard not present.  Using ttya for input and output.

FORCE,CPU-50(UltraSPARC-IIi 300MHz), No Keyboard
OpenBoot 3.10.8, 256 MB memory installed, Serial #9204337.
Ethernet address 0:80:42:10:2:74, Host ID: 808c7271.



Executing last command: boot -r
Boot device: /pci@1f,0/scsi@4/disk@3,0:a  File and args: -r
SunOS Release 5.7 Version Generic_106541-06 64-bit [UNIX(R) System V Release 4.0
]
Copyright (c) 1983-1999, Sun Microsystems, Inc.
configuring network interfaces: hme0.
Hostname: onl50t
Configuring the /devices directory
Configuring the /dev directory
Configuring the /dev directory (compatibility devices)
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c0t3d0s7: is clean.
NIS domainname is kek.jp
starting rpc services: rpcbind keyserv done.
Setting netmask of hme0 to 255.255.248.0
Setting default interface for multicast: add net 224.0.0.0: gateway onl50t
syslog service starting.
Print services started.
volume management starting.
The system is ready.

onl50t console login: 
        ok. 正常に立ち上がった。

onl50t# ifconfig -a
lo0: flags=849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232
        inet 127.0.0.1 netmask ff000000 
hme0: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
        inet 130.87.217.131 netmask fffff800 broadcast 130.87.223.255
        ether 0:80:42:10:2:74 
onl50t# netstat -rn

Routing Table:
  Destination           Gateway           Flags  Ref   Use   Interface
-------------------- -------------------- ----- ----- ------ ---------
130.87.216.0         130.87.217.131        U        3     27  hme0
224.0.0.0            130.87.217.131        U        3      0  hme0
default              130.87.216.1          UG       0    658  
127.0.0.1            127.0.0.1             UH       0   1118  lo0
onl50t# netstat -r

Routing Table:
  Destination           Gateway           Flags  Ref   Use   Interface
-------------------- -------------------- ----- ----- ------ ---------
130.87.216.0         onl50t                U        3     27  hme0
BASE-ADDRESS.MCAST.NET onl50t                U        3      0  hme0
default              ICCFP1                UG       0    658  
localhost            localhost             UH       0   1118  lo0
onl50t# 


 (4).   システム情報をチェック

   (4-1).  pkginfo を実行

onl50t# pkginfo | grep FRC
system      FRCctrl        FORCE sysconfig driver
system      FRCflash       Flash Memory Driver
system      FRCvme         FORCE VMEbus Drivers
onl50t# pkginfo -l FRCvme
   PKGINST:  FRCvme
      NAME:  FORCE VMEbus Drivers
  CATEGORY:  system
      ARCH:  sparcv9
   VERSION:  V2.4.1
   BASEDIR:  /
    VENDOR:  FORCE COMPUTERS GmbH
      DESC:  Drivers for accessing the VMEbus, CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50, Solaris 7,2.5,2.5.1,2.6
    PSTAMP:  helios19990806131008
  INSTDATE:  Feb 09 2000 16:15
    STATUS:  completely installed
     FILES:    200 installed pathnames
                15 shared pathnames
                84 directories
                57 executables
             13749 blocks used (approx)

onl50t# 

onl50t# pkginfo -l FRCflash
   PKGINST:  FRCflash
      NAME:  Flash Memory Driver
  CATEGORY:  system
      ARCH:  sparcv9
   VERSION:  V1.1.2
   BASEDIR:  /
    VENDOR:  FORCE COMPUTERS GmbH
      DESC:  Driver for accessing flash memory devices on FORCE CPU-3CE,5CE,5TE,5V,5VT,7V,8VT,10,20Vx,24VT,50x/CPCI-52x
    PSTAMP:  helios19990114075905
  INSTDATE:  Feb 09 2000 16:12
    STATUS:  completely installed
     FILES:     59 installed pathnames
                11 shared pathnames
                26 directories
                12 executables
               973 blocks used (approx)

onl50t# 

onl50t# pkginfo -l FRCctrl
   PKGINST:  FRCctrl
      NAME:  FORCE sysconfig driver
  CATEGORY:  system
      ARCH:  sparcv9
   VERSION:  V1.2
   BASEDIR:  /
    VENDOR:  FORCE COMPUTERS GmbH
      DESC:  FORCE Board Control Driver for SPARC/CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50/CPCI-52x
    PSTAMP:  helios19981119104632
  INSTDATE:  Feb 09 2000 16:11
    STATUS:  completely installed
     FILES:     25 installed pathnames
                 4 shared pathnames
                12 directories
                 9 executables
               558 blocks used (approx)

onl50t# 

   (4-2).  prtconf を実行

onl50t# prtconf -v
System Configuration:  Sun Microsystems  sun4u
Memory size: 256 Megabytes
System Peripherals (Software Nodes):

FORCE,CPU-50
    System properties:
        name <relative-addressing> length <4>
            value <0x00000001>.
        name <MMU_PAGEOFFSET> length <4>
            value <0x00001fff>.
        name <MMU_PAGESIZE> length <4>
            value <0x00002000>.
        name <PAGESIZE> length <4>
            value <0x00002000>.
    Driver properties:
        name <pm-hardware-state> length <18>
            value <0x6e6f2d73757370656e642d726573756d6500>.
    packages (driver not attached)
        terminal-emulator (driver not attached)
        deblocker (driver not attached)
        obp-tftp (driver not attached)
        disk-label (driver not attached)
        ufs-file-system (driver not attached)
        cdfs (driver not attached)
        SUNW,builtin-drivers (driver not attached)
        sun-keyboard (driver not attached)
        busnet-demo (driver not attached)
        ufs-file-system (driver not attached)
    chosen (driver not attached)
    openprom (driver not attached)
        client-services (driver not attached)
    options, instance #0
        System properties:
            name <ttymodes> length <36>
                value <0x0000250200001805000000bd00008a3b031c7f150400000011131a19120f171600000000>.
            name <class> length <5>
                value <0x726f6f7400>.
    aliases (driver not attached)
    memory (driver not attached)
    virtual-memory (driver not attached)
    pci, instance #0
        Register Specifications:
            Bus Type=0x1fe, Address=0x0, Size=0x10000
            Bus Type=0x1fe, Address=0x1000000, Size=0x100
        Range Specifications:
            Ch: 00,00000000 Pa: 00,000001fe, Sz: 1000000
            Ch: 00,01000000 Pa: 1000000,00000000, Sz: 0
            Ch: 1fe,02000000 Pa: 00,01000000, Sz: 2000000
            Ch: 00,00000000 Pa: 1ff,00000000, Sz: 1
            Ch: 00,03000000 Pa: 00,00000000, Sz: 1ff
        Interrupt Specifications:
            Interrupt Priority=0xe (ipl 14), vector=0x7f0 (2032)
            Interrupt Priority=0xe (ipl 14), vector=0x7ee (2030)
            Interrupt Priority=0xe (ipl 14), vector=0x7ef (2031)
            Interrupt Priority=0xe (ipl 14), vector=0x7e5 (2021)
        pci, instance #0
            Driver properties:
                name <device_type> length <4>
                    value <0x70636900>.
            Hardware properties:
                name <cache-line-size> length <4>
                    value <0x00000010>.
            network, instance #0
                Driver properties:
                    name <cache-line-size> length <4>
                        value <0x00000010>.
                    name <interrupts> length <4>
                        value <0x00000001>.
                    name <device-id> length <4>
                        value <0x00001001>.
                    name <vendor-id> length <4>
                        value <0x0000108e>.
                    name <reg> length <40>
                        value <0x00010900000000000000000000000000000000000201091000000000000000000000000000007020>.
            scsi, instance #0
                Driver properties:
                    name <scsi-options> length <4>
                        value <0x00001ff8>.
                    name <scsi-watchdog-tick> length <4>
                        value <0x0000000a>.
                    name <scsi-tag-age-limit> length <4>
                        value <0x00000002>.
                    name <scsi-reset-delay> length <4>
                        value <0x00000bb8>.
                    name <cache-line-size> length <4>
                        value <0x00000010>.
                    name <interrupts> length <4>
                        value <0x00000001>.
                    name <device-id> length <4>
                        value <0x0000000f>.
                    name <vendor-id> length <4>
                        value <0x00001000>.
                    name <reg> length <80>
                        value <0x0001200000000000000000000000000000000000010120100000000000000000000000000000010002012014000000000000000000000000000001000201201800000000000000000000000000001000>.
                disk (driver not attached)
                tape (driver not attached)
                sd, instance #0 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000000>.
                        name <class_prop> length <6>
                            value <0x617461706900>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #1 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000001>.
                        name <class_prop> length <6>
                            value <0x617461706900>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #2 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000002>.
                        name <class_prop> length <6>
                            value <0x617461706900>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #3 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000003>.
                        name <class_prop> length <6>
                            value <0x617461706900>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #4 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000004>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #5 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000005>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #6 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000006>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #7 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000008>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #8 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x00000009>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #9 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x0000000a>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #10 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x0000000b>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #11 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x0000000c>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #12 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x0000000d>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #13 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x0000000e>.
                        name <class> length <5>
                            value <0x7363736900>.
                sd, instance #14 (driver not attached)
                    System properties:
                        name <lun> length <4>
                            value <0x00000000>.
                        name <target> length <4>
                            value <0x0000000f>.
                        name <class> length <5>
                            value <0x7363736900>.
        ebus, instance #0
            Driver properties:
                name <no-dma-interrupt-sync> length <0> -- <no value>.
            Hardware properties:
                name <cache-line-size> length <4>
                    value <0x00000010>.
            auxio (driver not attached)
            power, instance #0 (driver not attached)
                Hardware properties:
                    name <last-address> length <10>
                        value <0x31342c37323430303000>.
            SUNW,pll (driver not attached)
            se, instance #0
                Interrupt Specifications:
                    Interrupt Priority=0xc (ipl 12), vector=0x2b (43)
            su, instance #0
                Interrupt Specifications:
                    Interrupt Priority=0xc (ipl 12), vector=0x29 (41)
            su, instance #1
                Interrupt Specifications:
                    Interrupt Priority=0xc (ipl 12), vector=0x2a (42)
            ecpp, instance #0 (driver not attached)
                Hardware properties:
                    name <last-address> length <10>
                        value <0x31342c33343033626300>.
            fdthree, instance #0 (driver not attached)
                Hardware properties:
                    name <last-address> length <10>
                        value <0x31342c33323033663000>.
            eeprom (driver not attached)
            sysconfig, instance #0 (driver not attached)
                Hardware properties:
                    name <last-address> length <10>
                        value <0x31342c36303030303000>.
            flashprom, instance #0 (driver not attached)
                Hardware properties:
                    name <last-address> length <10>
                        value <0x31342c36303030303000>.
            SUNW,CS4231, instance #0 (driver not attached)
                Hardware properties:
                    name <last-address> length <10>
                        value <0x31342c32303030303000>.
        network, instance #1
            Hardware properties:
                name <cache-line-size> length <4>
                    value <0x00000010>.
            Interrupt Specifications:
                Interrupt Priority=0x6 (ipl 6), vector=0x21 (33)
        scsi, instance #1
            Driver properties:
                name <target3-TQ> length <4>
                    value <0x00000001>.
                name <target3-wide> length <4>
                    value <0x00000000>.
                name <target3-sync-speed> length <4>
                    value <0x00004e20>.
                name <target2-TQ> length <4>
                    value <0x00000001>.
                name <target2-wide> length <4>
                    value <0x00000000>.
                name <target2-sync-speed> length <4>
                    value <0x00004e20>.
                name <scsi-options> length <4>
                    value <0x00001ff8>.
                name <scsi-watchdog-tick> length <4>
                    value <0x0000000a>.
                name <scsi-tag-age-limit> length <4>
                    value <0x00000002>.
                name <scsi-reset-delay> length <4>
                    value <0x00000bb8>.
            Hardware properties:
                name <cache-line-size> length <4>
                    value <0x00000010>.
            Interrupt Specifications:
                Interrupt Priority=0x4 (ipl 4), vector=0x20 (32)
            disk (driver not attached)
            tape (driver not attached)
            sd, instance #15 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000000>.
                    name <class_prop> length <6>
                        value <0x617461706900>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #16 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000001>.
                    name <class_prop> length <6>
                        value <0x617461706900>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #17
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000002>.
                    name <class_prop> length <6>
                        value <0x617461706900>.
                    name <class> length <5>
                        value <0x7363736900>.
                Driver properties:
                    name <pm-hardware-state> length <21>
                        value <0x6e656564732d73757370656e642d726573756d6500>.
                    name <ddi-kernel-ioctl> length <0> -- <no value>.
            sd, instance #18
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000003>.
                    name <class_prop> length <6>
                        value <0x617461706900>.
                    name <class> length <5>
                        value <0x7363736900>.
                Driver properties:
                    name <pm-hardware-state> length <21>
                        value <0x6e656564732d73757370656e642d726573756d6500>.
                    name <ddi-kernel-ioctl> length <0> -- <no value>.
            sd, instance #19 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000004>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #20 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000005>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #21 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000006>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #22 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000008>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #23 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x00000009>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #24 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x0000000a>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #25 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x0000000b>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #26 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x0000000c>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #27 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x0000000d>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #28 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x0000000e>.
                    name <class> length <5>
                        value <0x7363736900>.
            sd, instance #29 (driver not attached)
                System properties:
                    name <lun> length <4>
                        value <0x00000000>.
                    name <target> length <4>
                        value <0x0000000f>.
                    name <class> length <5>
                        value <0x7363736900>.
        vme, instance #0
            System software properties:
                name <pamc> length <8>
                    value <0x0000001000000011>.
            Interrupt Specifications:
                Interrupt Priority=0xd (ipl 13), vector=0x7c0 (1984)
                Interrupt Priority=0x300 (ipl 0), vector=0x12c148 (1229128)
                Interrupt Priority=0xb (ipl 11), vector=0x7c8 (1992)
                Interrupt Priority=0x300 (ipl 0), vector=0x12c148 (1229128)
                Interrupt Priority=0x9 (ipl 9), vector=0x7c9 (1993)
                Interrupt Priority=0x300 (ipl 0), vector=0x12c148 (1229128)
                Interrupt Priority=0x7 (ipl 7), vector=0x7ca (1994)
                Interrupt Priority=0x300 (ipl 0), vector=0x12c148 (1229128)
            busnet (driver not attached)
    SUNW,UltraSPARC-IIi (driver not attached)
    pseudo, instance #0
        System properties:
            name <class> length <5>
                value <0x726f6f7400>.
onl50t# 

   (4-3).  sysinfo を実行

onl50t# /net/onlsun1/home3/local/bin/sysinfo


        GENERAL INFORMATION

Host Name           : onl50t
Host Aliases        : 
Host Address(es)    : 130.87.217.131 
Host ID             : 808c7271
/net/onlsun1/home3/local/bin/sysinfo: /dev/ksyms is not a 32-bit kernel namelist
Serial Number       : 
Manufacturer        : Sun (Sun Microsystems)
/net/onlsun1/home3/local/bin/sysinfo: /dev/ksyms is not a 32-bit kernel namelist
/net/onlsun1/home3/local/bin/sysinfo: /dev/ksyms is not a 32-bit kernel namelist
System Model        : CPU 50
Main Memory         : 
/net/onlsun1/home3/local/bin/sysinfo: /dev/ksyms is not a 32-bit kernel namelist
Virtual Memory      : 
/net/onlsun1/home3/local/bin/sysinfo: /dev/ksyms is not a 32-bit kernel namelist
ROM Version         : 
CPU Type            : sparc
Number of CPUs      : 1
App Architecture    : sparc
Kernel Architecture : sun4u
OS Name             : SunOS
OS Version          : 5.7
Kernel Version      : SunOS Release 5.7 Version Generic_106541-06 [UNIX(R) System V Release 4.0]
/net/onlsun1/home3/local/bin/sysinfo: /dev/ksyms is not a 32-bit kernel namelist
Segmentation Fault (core dumped)
onl50t# 

   (4-4).  messages

        "boot -r" を実行した時の /var/adm/messages のチェック。

Feb  9 16:15:48 onl50t unix: vmectl0 is /pci@1f,0/vme@5/vmectl
Feb  9 17:50:58 onl50t unix: syncing file systems...
Feb  9 17:50:58 onl50t unix:  done
Feb  9 17:52:12 onl50t unix: SunOS Release 5.7 Version Generic_106541-06 64-bit [UNIX(R) System V Release 4.0]
Feb  9 17:52:12 onl50t unix: Copyright (c) 1983-1999, Sun Microsystems, Inc.
Feb  9 17:52:12 onl50t unix: Ethernet address = 0:80:42:10:2:74
Feb  9 17:52:12 onl50t unix: mem = 262144K (0x10000000)
Feb  9 17:52:12 onl50t unix: avail mem = 251117568
Feb  9 17:52:12 onl50t unix: root nexus = FORCE,CPU-50(UltraSPARC-IIi 300MHz)
Feb  9 17:52:12 onl50t unix: pci0 at root: UPA 0x1f 0x0
Feb  9 17:52:12 onl50t unix: pci0 is /pci@1f,0
Feb  9 17:52:12 onl50t unix: PCI-device: pci@2,1, simba0
Feb  9 17:52:12 onl50t unix: /pci@1f,0/pci@2,1/scsi@4 (glm0):
Feb  9 17:52:12 onl50t 	Rev. 4 Symbios 53c875 found.
Feb  9 17:52:12 onl50t unix: PCI-device: scsi@4, glm0
Feb  9 17:52:12 onl50t unix: glm0 is /pci@1f,0/pci@2,1/scsi@4
Feb  9 17:52:12 onl50t unix: /pci@1f,0/scsi@4 (glm1):
Feb  9 17:52:12 onl50t 	Rev. 4 Symbios 53c875 found.
Feb  9 17:52:12 onl50t unix: PCI-device: scsi@4, glm1
Feb  9 17:52:12 onl50t unix: glm1 is /pci@1f,0/scsi@4
Feb  9 17:52:17 onl50t unix: sd17 at glm1:
Feb  9 17:52:17 onl50t unix:  target 2 lun 0
Feb  9 17:52:17 onl50t unix: sd17 is /pci@1f,0/scsi@4/sd@2,0
Feb  9 17:52:17 onl50t unix: 	<SDX9105UL cyl 7499 alt 2 hd 10 sec 237>
Feb  9 17:52:17 onl50t unix: sd18 at glm1:
Feb  9 17:52:17 onl50t unix:  target 3 lun 0
Feb  9 17:52:17 onl50t unix: sd18 is /pci@1f,0/scsi@4/sd@3,0
Feb  9 17:52:17 onl50t unix: 	<SDX9105UM cyl 9004 alt 2 hd 8 sec 246>
Feb  9 17:52:20 onl50t unix: root on /pci@1f,0/scsi@4/disk@3,0:a fstype ufs
Feb  9 17:52:20 onl50t unix: VME: Universe rev. 1 at 0x210000
Feb  9 17:52:20 onl50t unix: VME: LCA rev. 2 at 0xfffa4000
Feb  9 17:52:20 onl50t unix: FRCvme V2.4.1 VME Nexus 
Feb  9 17:52:20 onl50t unix: PCI-device: vme@5, VME0
Feb  9 17:52:20 onl50t unix: PCI-device: ebus@1, ebus0
Feb  9 17:52:20 onl50t unix: su0 at ebus0: offset 14,3803f8
Feb  9 17:52:20 onl50t unix: su0 is /pci@1f,0/ebus@1/su@14,3803f8
Feb  9 17:52:20 onl50t unix: su1 at ebus0: offset 14,3602f8
Feb  9 17:52:20 onl50t unix: su1 is /pci@1f,0/ebus@1/su@14,3602f8
Feb  9 17:52:20 onl50t unix: keyboard is </pci@1f,0/ebus@1/su@14,3803f8> major <37> minor <0>
Feb  9 17:52:20 onl50t unix: mouse is </pci@1f,0/ebus@1/su@14,3602f8> major <37> minor <1>
Feb  9 17:52:20 onl50t unix: se0 at ebus0: offset 14,400000
Feb  9 17:52:20 onl50t unix: se0 is /pci@1f,0/ebus@1/se@14,400000
Feb  9 17:52:20 onl50t unix: stdin is </pci@1f,0/ebus@1/se@14,400000:a> major <20> minor <0>
Feb  9 17:52:20 onl50t unix: stdout is </pci@1f,0/ebus@1/se@14,400000:a> major <20> minor <0>
Feb  9 17:52:21 onl50t unix: cpu0: SUNW,UltraSPARC-IIi (upaid 0 impl 0x12 ver 0x13 clock 300 MHz)
Feb  9 17:52:22 onl50t unix: SUNW,hme0: CheerIO 2.0 (Rev Id = c1) Found
Feb  9 17:52:22 onl50t unix: PCI-device: network@1,1, hme0
Feb  9 17:52:22 onl50t unix: hme0 is /pci@1f,0/pci@2,1/network@1,1
Feb  9 17:52:22 onl50t unix: PCI-device: network@1,1, hme1
Feb  9 17:52:22 onl50t unix: hme1 is /pci@1f,0/network@1,1
Feb  9 17:52:24 onl50t unix: dump on /dev/dsk/c0t3d0s3 size 148 MB
Feb  9 17:52:26 onl50t unix: SUNW,hme0: Using Internal Transceiver
Feb  9 17:52:26 onl50t unix: SUNW,hme0: 10 Mbps half-duplex Link Up
Feb  9 17:52:27 onl50t unix: NOTICE: bwtwo: 64-bit driver module not found
Feb  9 17:52:28 onl50t unix: NOTICE: audio: 64-bit driver module not found
Feb  9 17:52:28 onl50t unix: NOTICE: cgthree: 64-bit driver module not found
Feb  9 17:52:35 onl50t unix: NOTICE: eide: 64-bit driver module not found
Feb  9 17:52:35 onl50t unix: NOTICE: ata: 64-bit driver module not found
Feb  9 17:52:35 onl50t unix: NOTICE: cmdk: 64-bit driver module not found
Feb  9 17:52:44 onl50t unix: NOTICE: xbox: 64-bit driver module not found
Feb  9 17:52:45 onl50t unix: pseudo-device: winlock0
Feb  9 17:52:45 onl50t unix: winlock0 is /pseudo/winlock@0
Feb  9 17:52:45 onl50t unix: pseudo-device: devinfo0
Feb  9 17:52:45 onl50t unix: devinfo0 is /pseudo/devinfo@0
Feb  9 17:52:45 onl50t unix: pseudo-device: lockstat0
Feb  9 17:52:45 onl50t unix: lockstat0 is /pseudo/lockstat@0
Feb  9 17:52:45 onl50t unix: pseudo-device: vol0
Feb  9 17:52:45 onl50t unix: vol0 is /pseudo/vol@0
Feb  9 17:52:45 onl50t unix: NOTICE: xbox: 64-bit driver module not found
Feb  9 17:52:45 onl50t unix: pseudo-device: llc10
Feb  9 17:52:45 onl50t unix: llc10 is /pseudo/llc1@0
Feb  9 17:52:46 onl50t unix: audiocs0 at ebus0: offset 14,200000
Feb  9 17:52:46 onl50t unix: audiocs0 is /pci@1f,0/ebus@1/SUNW,CS4231@14,200000
Feb  9 17:52:46 onl50t unix: pseudo-device: pm0
Feb  9 17:52:46 onl50t unix: pm0 is /pseudo/pm@0
Feb  9 17:52:46 onl50t unix: pseudo-device: tod0
Feb  9 17:52:46 onl50t unix: tod0 is /pseudo/tod@0
Feb  9 17:52:46 onl50t unix: ecpp0 at ebus0: offset 14,3403bc
Feb  9 17:52:46 onl50t unix: ecpp0 is /pci@1f,0/ebus@1/ecpp@14,3403bc
Feb  9 17:52:47 onl50t unix: sysconfig0: LCA is CPU-50/520
Feb  9 17:52:47 onl50t unix: sysconfig0 at ebus0: offset 14,600000
Feb  9 17:52:47 onl50t unix: sysconfig0 is /pci@1f,0/ebus@1/sysconfig@14,600000
Feb  9 17:52:47 onl50t unix: flashprom0: Boot flash device not assembled, unknown or write protected.
Feb  9 17:52:47 onl50t unix: flashprom0: User flash device not assembled, unknown or write protected.
Feb  9 17:52:48 onl50t unix: vmeplus0 at vme0: space 0xad,0 and space 0xbd,0 and space 0x8d,0 and vme16d16,0x0 and vme24d16,0x0 and vme32d16,0x0 and vme16d32,0x0 and vme24d32,0x0 and vme32d32,0x0 and space 0x3f,0 and space 0x3c,0 and space 0xf,0 and space 0xc,0 and space 0x20,0 and space 0xaf,0 and space 0x2f,0 and space 0x6f,0 and space 0x90,0 and space 0x91,0 and space 0x10,0 and space 0x11,0 and space 0x50,0 and space 0x51,0
Feb  9 17:52:48 onl50t unix: vmeplus0 is /pci@1f,0/vme@5/vmeplus@ad,0
Feb  9 17:52:48 onl50t unix: vmedma0 at vme0: space 0xad,0 and space 0xbd,0 and space 0x8d,0 and vme16d16,0x0 and vme24d16,0x0 and vme32d16,0x0 and vme16d32,0x0 and vme24d32,0x0 and vme32d32,0x0 and space 0x3f,0 and space 0x3c,0 and space 0xf,0 and space 0xc,0 and space 0x20,0
Feb  9 17:52:48 onl50t unix: vmedma0 is /pci@1f,0/vme@5/vmedma@ad,0
Feb  9 17:52:48 onl50t unix: vmefdma0 at vme0: space 0xad,0 and space 0xbd,0 and space 0x8d,0 and vme16d16,0x0 and vme24d16,0x0 and vme32d16,0x0 and vme16d32,0x0 and vme24d32,0x0 and vme32d32,0x0 and space 0x3f,0 and space 0x3c,0 and space 0xf,0 and space 0xc,0 and space 0x20,0
Feb  9 17:52:48 onl50t unix: vmefdma0 is /pci@1f,0/vme@5/vmefdma@ad,0
Feb  9 17:52:48 onl50t unix: vmedvma0 at vme0
Feb  9 17:52:48 onl50t unix: vmedvma0 is /pci@1f,0/vme@5/vmedvma
Feb  9 17:52:48 onl50t unix: vmectl0 at vme0
Feb  9 17:52:48 onl50t unix: vmectl0 is /pci@1f,0/vme@5/vmectl
Feb 10 10:09:27 onl50t unix: pseudo-device: devinfo0
Feb 10 10:09:27 onl50t unix: devinfo0 is /pseudo/devinfo@0
Feb 10 10:15:19 onl50t unix: NOTICE: sysinfo, uid 0: setuid execution not allowed, dev=c400000004

	以上で VMEドライバのインストールを終わる。
	次に、camacドライバのインストールを行う。

---xxxx(ここまでやった。継続中)

---
 (6).  セクション
   (6-1).  サブセクション
     (6-1-1).  サブサブセクション