Jun 4,1999 onl50t: Solaris 2.6 cc ドライバのテスト. Solaris2.6 システムのインストール --- VMEドライバのインストール#03 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (http://www-online.kek.jp/~inoue/CAMAC/ onl50t-Solaris2.6/Desktop/vme-step01-0.txt) 高エネルギー加速器研究機構 素粒子原子核研究所 物理、オンライングループ 井上 栄二 (1). 現状確認 (A). 株式会社ロジックハウスの白田様より SPARC CPU-50T を借用した。 (B). FORCE,CPU-50(UltraSPARC-IIi 300MHz)、に Solaris2.6 のシステムを インストールした。 (C). /etc の下の各設定、および /export/home の作成をやった。 (D). "Solaris2.6 Hardware: 5/98 SMCC Desktop 日本語版 SPARC版"では ディスクレス・クライアントを設定することはできないことを確認した。 (2). ここでやるべきこと CPU-50T に Solaris2.6用の VMEドライバ、FRCvme-2.3.1 をインストールする。 (3). FRCvme をインストールする (3-1). pkginfo を実行して、現在インストールされているFRCvme をチェック。 onl50t# pkginfo -l FRCvme ERROR: information for "FRCvme" was not found onl50t# (3-2). pkgadd を実行して、FRCvme をインストールする。 onl50t# pwd /export/home/onl50t/inoue/FORCE/FORCE-driver onl50t# ls -l total 13650 -r-xr-xr-x 1 inoue kek 5601792 Oct 7 1998 frcdrv-2.5.pkg -rw-r--r-- 1 inoue kek 590 Nov 2 1998 inoue.chk -r-xr-xr-x 1 inoue kek 172094 Oct 7 1998 rn209747.pdf -r-xr-xr-x 1 inoue kek 1179014 Oct 7 1998 um204936.pdf onl50t# pkgadd -d ./frcdrv-2.5.pkg The following packages are available: 1 FRCctrl sysconfig driver SPARC/CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50/CPCI-52x (sparc.force) V1.1.1 2 FRCflash Flash Memory Driver CPU-3CE,5CE,5TE,5V,5VT,7V,8VT,10,20Vx,24VT,50x,52x Solaris 2.5, 2.5.1, 2.6 (sparc.force) V1.1.1 3 FRCvme VMEbus Driver CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50 Solaris 2.5,2.5.1,2.6 (sparc.force) V2.3.1 Select package(s) you wish to process (or 'all' to process all packages). (default: all) [?,??,q]: Processing package instance from VMEbus Driver CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50 Solaris 2.5,2.5.1,2.6 (sparc.force) V2.3.1 Copyright FORCE COMPUTERS 1996-1998 Installing the following classes: base targ sysfile Hardware: FORCE,CPU-50 Do you want to disable the mcp serial drivers? y [y,n,?] Using as the package base directory. ## Processing package information. ## Processing system information. ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. ## Checking for setuid/setgid programs. This package contains scripts which will be executed with super-user permission during the process of installing this package. Do you want to continue with the installation of [y,n,?] y Installing VMEbus Driver CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50 Solaris 2.5,2.5.1,2.6 as ## Installing part 1 of 1. /opt/FRCvme/README /opt/FRCvme/SunOS_5_5/platform/sun4m/kernel/drv/VME_fga5000 /opt/FRCvme/SunOS_5_5/platform/sun4m/kernel/drv/VME_s4 /opt/FRCvme/SunOS_5_5/platform/sun4m/kernel/drv/verbose/VME_fga5000 /opt/FRCvme/SunOS_5_5/platform/sun4m/kernel/drv/verbose/VME_s4 /opt/FRCvme/SunOS_5_5_1/platform/sun4m/kernel/drv/VME_fga5000 /opt/FRCvme/SunOS_5_5_1/platform/sun4m/kernel/drv/VME_s4 /opt/FRCvme/SunOS_5_5_1/platform/sun4m/kernel/drv/verbose/VME_fga5000 /opt/FRCvme/SunOS_5_5_1/platform/sun4m/kernel/drv/verbose/VME_s4 /opt/FRCvme/SunOS_5_5_1/platform/sun4u/kernel/drv/VME_universe /opt/FRCvme/SunOS_5_5_1/platform/sun4u/kernel/drv/verbose/VME_universe /opt/FRCvme/SunOS_5_6/platform/sun4m/kernel/drv/VME_fga5000 /opt/FRCvme/SunOS_5_6/platform/sun4m/kernel/drv/VME_s4 /opt/FRCvme/SunOS_5_6/platform/sun4m/kernel/drv/verbose/VME_fga5000 /opt/FRCvme/SunOS_5_6/platform/sun4m/kernel/drv/verbose/VME_s4 /opt/FRCvme/SunOS_5_6/platform/sun4u/kernel/drv/VME_universe /opt/FRCvme/SunOS_5_6/platform/sun4u/kernel/drv/verbose/VME_universe /opt/FRCvme/drv/common/common.c /opt/FRCvme/drv/vmectl/Makefile /opt/FRCvme/drv/vmectl/vmectl.c /opt/FRCvme/drv/vmedma/Makefile /opt/FRCvme/drv/vmedma/vmedma.c /opt/FRCvme/drv/vmedvma/Makefile /opt/FRCvme/drv/vmedvma/vmedvma.c /opt/FRCvme/drv/vmefdma/Makefile /opt/FRCvme/drv/vmefdma/vmefdma.c /opt/FRCvme/drv/vmeplus/Makefile /opt/FRCvme/drv/vmeplus/safe_write.o /opt/FRCvme/drv/vmeplus/vmecopy.o /opt/FRCvme/drv/vmeplus/vmeplus.c /opt/FRCvme/examples/Makefile /opt/FRCvme/examples/README /opt/FRCvme/examples/errorcount /opt/FRCvme/examples/errorcount.c /opt/FRCvme/examples/sevenseg /opt/FRCvme/examples/sevenseg.c /opt/FRCvme/examples/shmem /opt/FRCvme/examples/shmem.c /opt/FRCvme/examples/vme_dump /opt/FRCvme/examples/vme_dump.c /opt/FRCvme/examples/vmecp /opt/FRCvme/examples/vmecp.c /opt/FRCvme/examples/vmetest /opt/FRCvme/examples/vmetest.c /opt/FRCvme/kernel/drv/VME.conf /opt/FRCvme/kernel/drv/vmectl /opt/FRCvme/kernel/drv/vmectl.conf /opt/FRCvme/kernel/drv/vmedma /opt/FRCvme/kernel/drv/vmedma.conf /opt/FRCvme/kernel/drv/vmedvma /opt/FRCvme/kernel/drv/vmedvma.conf /opt/FRCvme/kernel/drv/vmefdma /opt/FRCvme/kernel/drv/vmefdma.conf /opt/FRCvme/kernel/drv/vmeplus /opt/FRCvme/kernel/drv/vmeplus.conf /opt/FRCvme/kernel/drv/vmeplus_gw /opt/FRCvme/sys/common.h /opt/FRCvme/sys/fga5000.h /opt/FRCvme/sys/s4.h /opt/FRCvme/sys/universe.h /opt/FRCvme/sys/vdi.h /opt/FRCvme/sys/vdi_types.h /opt/FRCvme/sys/vhi_types.h /opt/FRCvme/sys/vme.h /opt/FRCvme/sys/vme_debug.h /opt/FRCvme/sys/vme_types.h /opt/FRCvme/sys/vui.h /opt/FRCvme/usr/lib/libvui.a /opt/FRCvme/vui/Makefile /opt/FRCvme/vui/libvui.c [ verifying class ] /kernel/drv/vmectl /kernel/drv/vmectl.conf /kernel/drv/vmedma /kernel/drv/vmedma.conf /kernel/drv/vmedvma /kernel/drv/vmedvma.conf /kernel/drv/vmefdma /kernel/drv/vmefdma.conf /kernel/drv/vmeplus /kernel/drv/vmeplus.conf /platform/sun4m/kernel/drv/VME.conf /platform/sun4m /platform/sun4m/kernel /platform/sun4m/kernel/drv /platform/sun4m/kernel/drv/VME_fga5000 /platform/sun4m/kernel/drv/VME_s4 /platform/sun4u/kernel/drv/VME.conf /platform/sun4u/kernel/drv/VME_universe [ verifying class ] /usr/include/sys/fga5000.h /usr/include/sys/s4.h /usr/include/sys/universe.h /usr/include/sys/vdi.h /usr/include/sys/vdi_types.h /usr/include/sys/vhi_types.h /usr/include/sys/vme.h /usr/include/sys/vme_debug.h /usr/include/sys/vme_types.h /usr/include/sys/vui.h /usr/lib/libvui.a [ verifying class ] ## Executing postinstall script. Disabling mcp driver in //etc/system Installing drivers... Modifying //etc/devlink.tab drvconfig: Driver (VME) failed to attach Warning: Driver (VME) successfully added to system but failed to attach drvconfig: Driver (vmeplus) failed to attach Warning: Driver (vmeplus) successfully added to system but failed to attach drvconfig: Driver (vmedma) failed to attach Warning: Driver (vmedma) successfully added to system but failed to attach drvconfig: Driver (vmefdma) failed to attach Warning: Driver (vmefdma) successfully added to system but failed to attach drvconfig: Driver (vmedvma) failed to attach Warning: Driver (vmedvma) successfully added to system but failed to attach drvconfig: Driver (vmectl) failed to attach Warning: Driver (vmectl) successfully added to system but failed to attach NOTE: Reboot your system so that the VME drivers are loaded. NOTE: Please consult //opt/FRCvme/README for notes on the following topics: o Recommendet patch for SPARC/CPU-50 NOTE: The mcp serial driver is disabled. To re-enable it, remove the entry exclude: drv/mcp from etc/system. Installation of was successful. Processing package instance from sysconfig driver SPARC/CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50/CPCI-52x (sparc.force) V1.1.1 Copyright FORCE COMPUTERS 1996,1997,1998 Using as the package base directory. ## Processing package information. ## Processing system information. ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. ## Checking for setuid/setgid programs. This package contains scripts which will be executed with super-user permission during the process of installing this package. Do you want to continue with the installation of [y,n,?] y Installing sysconfig driver SPARC/CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50/CPCI-52x as ## Installing part 1 of 1. /kernel/drv/sysconfig /opt/FRCctrl/examples/ledctl /opt/FRCctrl/examples/ledctl.c /opt/FRCctrl/examples/read_values /opt/FRCctrl/examples/sysconfig_test /opt/FRCctrl/examples/sysconfig_test.c /opt/FRCctrl/examples/temp_wait /opt/FRCctrl/examples/temp_wait.c /opt/FRCctrl/kernel/drv/sysconfig /opt/FRCctrl/man/man7/sysconfig.7d /opt/FRCctrl/sys/sysconfig_if.h [ verifying class ] ## Executing postinstall script. modifying //etc/devlink.tab Installation of was successful. Processing package instance from Flash Memory Driver CPU-3CE,5CE,5TE,5V,5VT,7V,8VT,10,20Vx,24VT,50x,52x Solaris 2.5, 2.5.1, 2.6 (sparc.force) V1.1.1 Copyright FORCE COMPUTERS 1996, 1997, 1998 Do you want to use the default installation? Installing the following classes: base targ sysfile CPU-Type: FORCE,CPU-50 flash-memory driver hardware configfile: flash-memory.50_520.conf Using as the package base directory. ## Processing package information. ## Processing system information. 4 package pathnames are already properly installed. ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. The following files are already installed on the system and are being used by another package: * /platform/sun4m * /platform/sun4m/kernel * /platform/sun4m/kernel/drv * - conflict with a file which does not belong to any package. Do you want to install these conflicting files [y,n,?,q] y ## Checking for setuid/setgid programs. This package contains scripts which will be executed with super-user permission during the process of installing this package. Do you want to continue with the installation of [y,n,?] y Installing Flash Memory Driver CPU-3CE,5CE,5TE,5V,5VT,7V,8VT,10,20Vx,24VT,50x,52x Solaris 2.5, 2.5.1, 2.6 as ## Installing part 1 of 1. /opt/FRCflash/drv/sun4m/flash-memory /opt/FRCflash/drv/sun4m/flash-memory.10.conf /opt/FRCflash/drv/sun4m/flash-memory.20VTe.conf /opt/FRCflash/drv/sun4m/flash-memory.24VT.conf /opt/FRCflash/drv/sun4m/flash-memory.3CE.conf /opt/FRCflash/drv/sun4m/flash-memory.5CE.conf /opt/FRCflash/drv/sun4m/flash-memory.5TE.conf /opt/FRCflash/drv/sun4m/flash-memory.5V.conf /opt/FRCflash/drv/sun4m/flash-memory.5VT.conf /opt/FRCflash/drv/sun4m/flash-memory.7V.conf /opt/FRCflash/drv/sun4m/flash-memory.8VT.conf /opt/FRCflash/drv/sun4u/flash-memory /opt/FRCflash/drv/sun4u/flash-memory.50_520.conf /opt/FRCflash/examples/fldump /opt/FRCflash/examples/fldump.c /opt/FRCflash/examples/flerase /opt/FRCflash/examples/flerase.c /opt/FRCflash/examples/flinfo /opt/FRCflash/examples/flinfo.c /opt/FRCflash/examples/flread /opt/FRCflash/examples/flread.c /opt/FRCflash/examples/flwrite /opt/FRCflash/examples/flwrite.c /opt/FRCflash/man/man7d/flash-memory.7d /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.10.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.20VTe.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.24VT.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.3CE.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.5CE.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.5TE.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.5V.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.5VT.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.7V.conf /opt/FRCflash/platform/sun4m/kernel/drv/flash-memory.8VT.conf /opt/FRCflash/platform/sun4u/kernel/drv/flash-memory /opt/FRCflash/platform/sun4u/kernel/drv/flash-memory.50_520.conf /opt/FRCflash/sys/flash.h [ verifying class ] /platform/sun4m/kernel/drv/flash-memory /platform/sun4u/kernel/drv/flash-memory [ verifying class ] /usr/include/sys/flash.h [ verifying class ] ## Executing postinstall script. Installing driver... Modifying //etc/devlink.tab and add driver. drvconfig: Driver (flash-memory) failed to attach Warning: Driver (flash-memory) successfully added to system but failed to attach Installation of was successful. onl50t# onl50t# cat /opt/FRCvme/README o Recommendet patch for SPARC/CPU-50 ---------------------------------- It is recommendet to install the following patch before using the VMEbus driver package on a SPARC/CPU-50: For Solaris 2.5.1: 105004-10 or higher (pci_pci, ebus, pci and rootnex driver patch) These patches are located in the "patches" subdirectory on the driver CD. For installation, - copy the patch file to a temporary directory on the target system, - uncompress and extract the archive: uncompress 105004-10.tar.Z tar xfv 105004-10.tar - install the patch: cd 105004-10 /usr/sbin/patchadd 105004-10 To install the patch on a server for a diskless client it is required to specify the root-path of the client using the -R switch. A complete list of options can be obtained by executing installpatch with no arguments. onl50t# FRCvme のインストールで drvconfig 時に attach が failed してしまった。 drvconfig: Driver (VME) failed to attach 株式会社ロジックハウスの高橋さんに問い合わせた。 <高橋さんからのメール> ---ここから > しています。 pkgadd で FRCvme をインストールすると drvconfig 時に > attach が failed してしまいました。 /OPT/FRCvme/README を見るようにと この状態にて、OSをシャットダウンしてOpenBootから show-devsコマンドを実行したときに ”ｖｍｅ”のデバイスが認識されているか、確認していただけますか？ インストール時のログで、ｐｒｔｃｏｎｆコマンドの実行結果では”ｖｍｅ”が 入っていないようですのでこれが原因かと思います。 電源を投入からしばらく（１５分以上）置いてから電源を再投入して 立ち上げると現象が発生するボードがあるようです。 いまのところ原因は、はっきりしていませんが 一度電源を落としてから、時間をおいて立ち上げると”ｖｍｅ”が 認識されます。 ---ここまで (3-3). show-devsコマンドで確認 onl50t# /usr/sbin/shutdown -i0 -g0 Shutdown started. Thu May 20 10:40:16 JST 1999 Do you want to continue? (y or n): y Broadcast Message from root (console) on onl50t Thu May 20 10:40:21... THE SYSTEM IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged showmount: onl50t: RPC: Program not registered Changing to init state 0 - please wait onl50t# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services stopped. Stopping the syslog service. syslogd: going down on signal 15 May 20 10:41:03 snmpdx: received signal 15 May 20 10:41:03 cssd: Got sig#15, sending it to all CSes and exit The system is down. syncing file systems... done Program terminated ok ok show-devs /SUNW,UltraSPARC-IIi@0,0 /pci@1f,0 /virtual-memory /memory@0,0 /aliases /options /openprom /chosen /packages /pci@1f,0/scsi@4 /pci@1f,0/network@1,1 /pci@1f,0/ebus@1 /pci@1f,0/pci@2,1 /pci@1f,0/scsi@4/tape /pci@1f,0/scsi@4/disk /pci@1f,0/ebus@1/SUNW,CS4231@14,200000 /pci@1f,0/ebus@1/flashprom@10,0 /pci@1f,0/ebus@1/sysconfig@14,600000 /pci@1f,0/ebus@1/eeprom@14,0 /pci@1f,0/ebus@1/fdthree@14,3203f0 /pci@1f,0/ebus@1/ecpp@14,3403bc /pci@1f,0/ebus@1/su@14,3602f8 /pci@1f,0/ebus@1/su@14,3803f8 /pci@1f,0/ebus@1/se@14,400000 /pci@1f,0/ebus@1/SUNW,pll@14,504000 /pci@1f,0/ebus@1/power@14,724000 /pci@1f,0/ebus@1/auxio@14,726000 /pci@1f,0/pci@2,1/scsi@4 /pci@1f,0/pci@2,1/network@1,1 /pci@1f,0/pci@2,1/scsi@4/tape /pci@1f,0/pci@2,1/scsi@4/disk /openprom/client-services /packages/ufs-file-system /packages/sun-keyboard /packages/SUNW,builtin-drivers /packages/cdfs /packages/ufs-file-system /packages/disk-label /packages/obp-tftp /packages/deblocker /packages/terminal-emulator ok ここで電源を落とす。 30分後に再度電源を入れて確認する。 ok | screen not found. Can't open input device. Keyboard not present. Using ttya for input and output. FORCE,CPU-50(UltraSPARC-IIi 300MHz), No Keyboard OpenBoot 3.10.4, 256 MB memory installed, Serial #9179254. Ethernet address 0:80:42:b:a0:76, Host ID: 808c1076. Boot device: disk3:a File and args: SunOS Release 5.6 Version Generic_105181-05 [UNIX(R) System V Release 4.0] Copyright (c) 1983-1997, Sun Microsystems, Inc. configuring network interfaces: hme0. Hostname: onl50t Configuring the /devices directory Configuring the /dev directory Configuring the /dev directory (compatibility devices) The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c0t3d0s5: is clean. /dev/rdsk/c0t3d0s4: is clean. /dev/rdsk/c0t3d0s7: is clean. /dev/rdsk/c0t3d0s3: is clean. add net default: gateway ICCFP1 NIS domainname is kek.jp starting rpc services: rpcbind keyserv done. Setting netmask of hme0 to 255.255.248.0 Setting default interface for multicast: add net 224.0.0.0: gateway onl50t syslog service starting. Print services started. starting Kana-Kanji converters: cssd. volume management starting. Wnn6: Key License Server started.... Nihongo Multi Client Server (Wnn6 R2.30) Finished Reading Files The system is ready. onl50t console login: inoue Password: Last login: Tue May 18 09:21:34 from onlsun1 Sun Microsystems Inc. SunOS 5.6 Generic August 1997 Starting OpenWindows in 5 seconds (type Control-C to interrupt)^Conl50t% onl50t% onl50t% prtconf System Configuration: Sun Microsystems sun4u Memory size: 256 Megabytes System Peripherals (Software Nodes): FORCE,CPU-50 packages (driver not attached) terminal-emulator (driver not attached) deblocker (driver not attached) obp-tftp (driver not attached) disk-label (driver not attached) ufs-file-system (driver not attached) cdfs (driver not attached) SUNW,builtin-drivers (driver not attached) sun-keyboard (driver not attached) ufs-file-system (driver not attached) chosen (driver not attached) openprom (driver not attached) client-services (driver not attached) options, instance #0 aliases (driver not attached) memory (driver not attached) virtual-memory (driver not attached) pci, instance #0 pci, instance #0 network, instance #0 scsi, instance #0 disk (driver not attached) tape (driver not attached) sd, instance #0 (driver not attached) sd, instance #1 (driver not attached) sd, instance #2 (driver not attached) sd, instance #3 (driver not attached) sd, instance #4 (driver not attached) sd, instance #5 (driver not attached) sd, instance #6 (driver not attached) sd, instance #7 (driver not attached) sd, instance #8 (driver not attached) sd, instance #9 (driver not attached) sd, instance #10 (driver not attached) sd, instance #11 (driver not attached) sd, instance #12 (driver not attached) sd, instance #13 (driver not attached) sd, instance #14 (driver not attached) ebus, instance #0 auxio (driver not attached) power, instance #0 (driver not attached) SUNW,pll (driver not attached) se, instance #0 su, instance #0 su, instance #1 ecpp, instance #0 (driver not attached) fdthree, instance #0 (driver not attached) eeprom (driver not attached) sysconfig, instance #0 (driver not attached) flashprom, instance #0 (driver not attached) SUNW,CS4231, instance #0 (driver not attached) network, instance #1 scsi, instance #1 disk (driver not attached) tape (driver not attached) sd, instance #15 (driver not attached) sd, instance #16 (driver not attached) sd, instance #17 (driver not attached) sd, instance #18 sd, instance #19 (driver not attached) sd, instance #20 (driver not attached) sd, instance #21 sd, instance #22 (driver not attached) sd, instance #23 (driver not attached) sd, instance #24 (driver not attached) sd, instance #25 (driver not attached) sd, instance #26 (driver not attached) sd, instance #27 (driver not attached) sd, instance #28 (driver not attached) sd, instance #29 (driver not attached) SUNW,UltraSPARC-IIi (driver not attached) pseudo, instance #0 onl50t% vmeデバイスを認識できていない。 onl50t% ls /dev arp ledc ptypc ptyr9 sd18f tnfmap ttyq8 audio llc1 ptypd ptyra sd18g tod ttyq9 audioctl lockstat ptype ptyrb sd18h tty ttyqa bd.off log ptypf ptyrc se_hdlc ttya ttyqb be logindmux ptyq0 ptyrd se_hdlc0 ttyb ttyqc ccv md ptyq1 ptyre se_hdlc1 ttyp0 ttyqd conslog mem ptyq2 ptyrf sevseg ttyp1 ttyqe console mouse ptyq3 qe sound ttyp2 ttyqf cua null ptyq4 qfe sp ttyp3 ttyr0 dsk openprom ptyq5 rawip sprom1 ttyp4 ttyr1 dump pcmcia ptyq6 rdsk sprom2 ttyp5 ttyr2 ecpp0 pm ptyq7 rmt sprom3 ttyp6 ttyr3 es printers ptyq8 rotsw sprom4 ttyp7 ttyr4 fbs profile ptyq9 rsd18a sr0 ttyp8 ttyr5 fd ptmajor ptyqa rsd18b stderr ttyp9 ttyr6 hme ptmx ptyqb rsd18c stdin ttypa ttyr7 icmp pts ptyqc rsd18d stdout ttypb ttyr8 ie ptyp0 ptyqd rsd18e swap ttypc ttyr9 ip ptyp1 ptyqe rsd18f syscon ttypd ttyra ipd ptyp2 ptyqf rsd18g systty ttype ttyrb ipdcm ptyp3 ptyr0 rsd18h tcp ttypf ttyrc ipdptp ptyp4 ptyr1 rsr0 tempr1 ttyq0 ttyrd isdn ptyp5 ptyr2 rts tempr2 ttyq1 ttyre kbd ptyp6 ptyr3 sad temprc ttyq2 ttyrf kkcv ptyp7 ptyr4 sd18a term ttyq3 udp kmem ptyp8 ptyr5 sd18b ticlts ttyq4 volctl kstat ptyp9 ptyr6 sd18c ticots ttyq5 winlock ksyms ptypa ptyr7 sd18d ticotsord ttyq6 wscons le ptypb ptyr8 sd18e tnfctl ttyq7 zero onl50t% vme用のデバイス・スペシャル・ファイルは作られていない。 # /usr/sbin/shutdown -i0 -g0 Shutdown started. Thu May 20 11:30:40 JST 1999 Do you want to continue? (y or n): y Broadcast Message from root (console) on onl50t Thu May 20 11:30:41... THE SYSTEM IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged showmount: onl50t: RPC: Program not registered Changing to init state 0 - please wait # INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services stopped. Stopping the syslog service. syslogd: going down on signal 15 May 20 11:31:23 snmpdx: received signal 15 May 20 11:31:23 cssd: Got sig#15, sending it to all CSes and exit The system is down. syncing file systems... done Program terminated ok ok show-devs /SUNW,UltraSPARC-IIi@0,0 /pci@1f,0 /virtual-memory /memory@0,0 /aliases /options /openprom /chosen /packages /pci@1f,0/scsi@4 /pci@1f,0/network@1,1 /pci@1f,0/ebus@1 /pci@1f,0/pci@2,1 /pci@1f,0/scsi@4/tape /pci@1f,0/scsi@4/disk /pci@1f,0/ebus@1/SUNW,CS4231@14,200000 /pci@1f,0/ebus@1/flashprom@10,0 /pci@1f,0/ebus@1/sysconfig@14,600000 /pci@1f,0/ebus@1/eeprom@14,0 /pci@1f,0/ebus@1/fdthree@14,3203f0 /pci@1f,0/ebus@1/ecpp@14,3403bc /pci@1f,0/ebus@1/su@14,3602f8 /pci@1f,0/ebus@1/su@14,3803f8 /pci@1f,0/ebus@1/se@14,400000 /pci@1f,0/ebus@1/SUNW,pll@14,504000 /pci@1f,0/ebus@1/power@14,724000 /pci@1f,0/ebus@1/auxio@14,726000 /pci@1f,0/pci@2,1/scsi@4 /pci@1f,0/pci@2,1/network@1,1 /pci@1f,0/pci@2,1/scsi@4/tape /pci@1f,0/pci@2,1/scsi@4/disk /openprom/client-services /packages/ufs-file-system /packages/sun-keyboard /packages/SUNW,builtin-drivers /packages/cdfs /packages/ufs-file-system /packages/disk-label /packages/obp-tftp /packages/deblocker /packages/terminal-emulator ok 電源を落とす前と比べて変化は見られない。 株式会社ロジックハウスの高橋さんからのメール。 ---ここから ＶＭＥラック、電源等の違いで起きていると思われます。 ＶＭＥラック等を替えて確認できますでしょうか？ ---ここまで 現在、使っている Schroff社の VMEクレートに代えて、Kristensen社の Wes Crates を使ってみる。 ok ok show-devs /SUNW,UltraSPARC-IIi@0,0 /pci@1f,0 /virtual-memory /memory@0,0 /aliases /options /openprom /chosen /packages /pci@1f,0/scsi@4 /pci@1f,0/network@1,1 /pci@1f,0/ebus@1 /pci@1f,0/pci@2,1 /pci@1f,0/scsi@4/tape /pci@1f,0/scsi@4/disk /pci@1f,0/ebus@1/SUNW,CS4231@14,200000 /pci@1f,0/ebus@1/flashprom@10,0 /pci@1f,0/ebus@1/sysconfig@14,600000 /pci@1f,0/ebus@1/eeprom@14,0 /pci@1f,0/ebus@1/fdthree@14,3203f0 /pci@1f,0/ebus@1/ecpp@14,3403bc /pci@1f,0/ebus@1/su@14,3602f8 /pci@1f,0/ebus@1/su@14,3803f8 /pci@1f,0/ebus@1/se@14,400000 /pci@1f,0/ebus@1/SUNW,pll@14,504000 /pci@1f,0/ebus@1/power@14,724000 /pci@1f,0/ebus@1/auxio@14,726000 /pci@1f,0/pci@2,1/scsi@4 /pci@1f,0/pci@2,1/network@1,1 /pci@1f,0/pci@2,1/scsi@4/tape /pci@1f,0/pci@2,1/scsi@4/disk /openprom/client-services /packages/sun-keyboard /packages/SUNW,builtin-drivers /packages/cdfs /packages/ufs-file-system /packages/disk-label /packages/obp-tftp /packages/deblocker /packages/terminal-emulator ok ok ok boot -r Boot device: /pci@1f,0/scsi@4/disk@3,0:a File and args: -r SunOS Release 5.6 Version Generic_105181-05 [UNIX(R) System V Release 4.0] Copyright (c) 1983-1997, Sun Microsystems, Inc. configuring network interfaces: hme0. Hostname: onl50t Configuring the /devices directory Configuring the /dev directory Configuring the /dev directory (compatibility devices) The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c0t3d0s5: is clean. /dev/rdsk/c0t3d0s4: is clean. /dev/rdsk/c0t3d0s7: is clean. /dev/rdsk/c0t3d0s3: is clean. add net default: gateway ICCFP1 NIS domainname is kek.jp starting rpc services: rpcbind keyserv done. Setting netmask of hme0 to 255.255.248.0 Setting default interface for multicast: add net 224.0.0.0: gateway onl50t syslog service starting. Print services started. starting Kana-Kanji converters: cssd. volume management starting. Wnn6: Key License Server started.... Nihongo Multi Client Server (Wnn6 R2.30) Finished Reading Files The system is ready. onl50t console login: root Password: Last login: Thu May 20 16:17:21 on console May 20 16:22:20 onl50t login: ROOT LOGIN /dev/console Sun Microsystems Inc. SunOS 5.6 Generic August 1997 Starting OpenWindows in 5 seconds (type Control-C to interrupt) ^C# # prtconf System Configuration: Sun Microsystems sun4u Memory size: 256 Megabytes System Peripherals (Software Nodes): FORCE,CPU-50 packages (driver not attached) terminal-emulator (driver not attached) deblocker (driver not attached) obp-tftp (driver not attached) disk-label (driver not attached) ufs-file-system (driver not attached) cdfs (driver not attached) SUNW,builtin-drivers (driver not attached) sun-keyboard (driver not attached) ufs-file-system (driver not attached) chosen (driver not attached) openprom (driver not attached) client-services (driver not attached) options, instance #0 aliases (driver not attached) memory (driver not attached) virtual-memory (driver not attached) pci, instance #0 pci, instance #0 network, instance #0 scsi, instance #0 disk (driver not attached) tape (driver not attached) sd, instance #0 (driver not attached) sd, instance #1 (driver not attached) sd, instance #2 (driver not attached) sd, instance #3 (driver not attached) sd, instance #4 (driver not attached) sd, instance #5 (driver not attached) sd, instance #6 (driver not attached) sd, instance #7 (driver not attached) sd, instance #8 (driver not attached) sd, instance #9 (driver not attached) sd, instance #10 (driver not attached) sd, instance #11 (driver not attached) sd, instance #12 (driver not attached) sd, instance #13 (driver not attached) sd, instance #14 (driver not attached) ebus, instance #0 auxio (driver not attached) power, instance #0 (driver not attached) SUNW,pll (driver not attached) se, instance #0 su, instance #0 su, instance #1 ecpp, instance #0 (driver not attached) fdthree, instance #0 (driver not attached) eeprom (driver not attached) sysconfig, instance #0 (driver not attached) flashprom, instance #0 (driver not attached) SUNW,CS4231, instance #0 (driver not attached) network, instance #1 scsi, instance #1 disk (driver not attached) tape (driver not attached) sd, instance #15 (driver not attached) sd, instance #16 (driver not attached) sd, instance #17 (driver not attached) sd, instance #18 sd, instance #19 (driver not attached) sd, instance #20 (driver not attached) sd, instance #21 (driver not attached) sd, instance #22 (driver not attached) sd, instance #23 (driver not attached) sd, instance #24 (driver not attached) sd, instance #25 (driver not attached) sd, instance #26 (driver not attached) sd, instance #27 (driver not attached) sd, instance #28 (driver not attached) sd, instance #29 (driver not attached) SUNW,UltraSPARC-IIi (driver not attached) pseudo, instance #0 # ls /dev arp log ptyq2 rawip sd21b tnfctl ttyqa audio logindmux ptyq3 rdsk sd21c tnfmap ttyqb audioctl md ptyq4 rmt sd21d tod ttyqc bd.off mem ptyq5 rotsw sd21e tty ttyqd be mouse ptyq6 rsd18a sd21f ttya ttyqe ccv null ptyq7 rsd18b sd21g ttyb ttyqf conslog openprom ptyq8 rsd18c sd21h ttyp0 ttyr0 console pcmcia ptyq9 rsd18d se_hdlc ttyp1 ttyr1 cua pm ptyqa rsd18e se_hdlc0 ttyp2 ttyr2 dsk printers ptyqb rsd18f se_hdlc1 ttyp3 ttyr3 dump profile ptyqc rsd18g sevseg ttyp4 ttyr4 ecpp0 ptmajor ptyqd rsd18h sound ttyp5 ttyr5 es ptmx ptyqe rsd21a sp ttyp6 ttyr6 fbs pts ptyqf rsd21b sprom1 ttyp7 ttyr7 fd ptyp0 ptyr0 rsd21c sprom2 ttyp8 ttyr8 hme ptyp1 ptyr1 rsd21d sprom3 ttyp9 ttyr9 icmp ptyp2 ptyr2 rsd21e sprom4 ttypa ttyra ie ptyp3 ptyr3 rsd21f sr0 ttypb ttyrb ip ptyp4 ptyr4 rsd21g stderr ttypc ttyrc ipd ptyp5 ptyr5 rsd21h stdin ttypd ttyrd ipdcm ptyp6 ptyr6 rsr0 stdout ttype ttyre ipdptp ptyp7 ptyr7 rts swap ttypf ttyrf isdn ptyp8 ptyr8 sad syscon ttyq0 udp kbd ptyp9 ptyr9 sd18a systty ttyq1 volctl kkcv ptypa ptyra sd18b tcp ttyq2 winlock kmem ptypb ptyrb sd18c tempr1 ttyq3 wscons kstat ptypc ptyrc sd18d tempr2 ttyq4 zero ksyms ptypd ptyrd sd18e temprc ttyq5 le ptype ptyre sd18f term ttyq6 ledc ptypf ptyrf sd18g ticlts ttyq7 llc1 ptyq0 qe sd18h ticots ttyq8 lockstat ptyq1 qfe sd21a ticotsord ttyq9 # 症状は変らない。 VMEを認識できていない。 株式会社ロジックハウスの白田さんからのメール。 ---ここから cpu-50ですが、明らかに何らかの不具合が 発生しているようです 修理をいたしますので、代替え分を準備いたします ---ここまで cpu-50 のボードを交換してから再度チェックする。 株式会社ロジックハウスの白田さんから代替用の CPU-50T を借用した。 代替 CPU-50T を挿して立ち上げてみる。 ok ` FORCE,CPU-50(UltraSPARC-IIi 300MHz), No Keyboard OpenBoot 3.10.6, 256 MB memory installed, Serial #9180267. Ethernet address 0:80:42:b:a4:6b, Host ID: 808c146b. ok 電源を on したらここで止まってしまった。 ok boot -r Drive not ready Boot device: /pci@1f,0/network@1,1 File and args: -r Network Link Setup Failed. Please Check Cable and Try Again. Network Link Setup Failed. Please Check Cable and Try Again. Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet ok ctl-C を押して中断した。 ok show-devs /SUNW,UltraSPARC-IIi@0,0 /pci@1f,0 /virtual-memory /memory@0,0 /aliases /options /openprom /chosen /packages /pci@1f,0/vme@5 /pci@1f,0/scsi@4 /pci@1f,0/network@1,1 /pci@1f,0/ebus@1 /pci@1f,0/pci@2,1 /pci@1f,0/vme@5/busnet@2d,0 /pci@1f,0/scsi@4/tape /pci@1f,0/scsi@4/disk /pci@1f,0/ebus@1/SUNW,CS4231@14,200000 /pci@1f,0/ebus@1/flashprom@10,0 /pci@1f,0/ebus@1/sysconfig@14,600000 /pci@1f,0/ebus@1/eeprom@14,0 /pci@1f,0/ebus@1/fdthree@14,3203f0 /pci@1f,0/ebus@1/ecpp@14,3403bc /pci@1f,0/ebus@1/su@14,3602f8 /pci@1f,0/ebus@1/su@14,3803f8 /pci@1f,0/ebus@1/se@14,400000 /pci@1f,0/ebus@1/SUNW,pll@14,504000 /pci@1f,0/ebus@1/power@14,724000 /pci@1f,0/ebus@1/auxio@14,726000 /pci@1f,0/pci@2,1/scsi@4 /pci@1f,0/pci@2,1/pci@2 /pci@1f,0/pci@2,1/network@1,1 /pci@1f,0/pci@2,1/scsi@4/tape /pci@1f,0/pci@2,1/scsi@4/disk /pci@1f,0/pci@2,1/pci@2/MEGATEK,ecl@4 /openprom/client-services /packages/busnet-demo /packages/sun-keyboard /packages/SUNW,builtin-drivers /packages/cdfs /packages/ufs-file-system /packages/disk-label /packages/obp-tftp /packages/deblocker /packages/terminal-emulator ok vme を認識できている。 ok ok printenv Variable Name Value Default Value bn-p-mbox-access 16 16 bn-p-mbox-space 45 45 bn-p-mbox-offset 840 840 bn-p-access 50 50 bn-p-space 61 61 bn-p-offset 0 0 bn-master-access 50 50 bn-master-space 61 61 bn-master-offset 0 0 bn-logical-addr 0 0 bn-packet-size 2048 2048 bn-rarp? false false bn-arp? false false bn-p-ip-addr 0 0 bn-master-ip-addr 0 0 bn-p-en-addr 0:0:0:0:0:0 0:0:0:0:0:0 bn-master-en-addr 0:0:0:0:0:0 0:0:0:0:0:0 bn-p-mbox? true true vme-arb-mode pri rrs vme-rel-mode rwd rwd vme-req-level 3 3 vme-fair-req? false true tpe-link-test? true true scsi-initiator-id 7 7 keyboard-click? false false keymap bootflash-#devices 0 0 bootflash-#megs 0 0 ttyb-rts-dtr-off false false ttyb-ignore-cd true true ttya-rts-dtr-off false false ttya-ignore-cd true true ttyb-mode 9600,8,n,1,- 9600,8,n,1,- ttya-mode 9600,8,n,1,- 9600,8,n,1,- pcib-io-probe-list 1,2,3,4 1,2,3,4 pci-probe-list 1,4,5 1,4,5 mfg-mode off off diag-level max max #power-cycles 1431655934 system-board-serial# UUUUUUUU ... system-board-date fcode-debug? true false output-device screen screen input-device keyboard keyboard load-base 16384 16384 boot-command boot boot auto-boot? false true watchdog-reboot? false false diag-file diag-device net net boot-file boot-device disk net disk net local-mac-address? false false ansi-terminal? true true screen-#columns 80 80 screen-#rows 34 34 silent-mode? false false use-nvramrc? false false nvramrc security-mode none security-password security-#badlogins 0 oem-logo oem-logo? false false oem-banner oem-banner? false false hardware-revision 210562400172 last-hardware-update 0 diag-switch? false false ok ok boot disk0 -r Boot device: /pci@1f,0/scsi@4/disk@0,0 File and args: -r Drive not ready Can't open boot device ok boot disk3 -r Boot device: /pci@1f,0/scsi@4/disk@3,0 File and args: -r SunOS Release 5.6 Version Generic_105181-05 [UNIX(R) System V Release 4.0] Copyright (c) 1983-1997, Sun Microsystems, Inc. configuring network interfaces: hme0. Hostname: onl50t Configuring the /devices directory FRCvme V2.3.1 VME Nexus ( Universe) vmeplus0 at vme0: vme16d16 0x0 and vme24d16 0x0 and vme32d16 0x0 and vme16d32 0x 0 and vme24d32 0x0 and vme32d32 0x0 and space 0x2f offset 0x0 and space 0x6f offset 0x0 and space 0x10 offset 0x0 and space 0x11 offset 0x0 and space 0x50 offset 0x0 and space 0x51 offset 0x0 vmedma0 at vme0 vmefdma0 at vme0 vmedvma0 at vme0 vmectl0 at vme0 Configuring the /dev directory Configuring the /dev directory (compatibility devices) The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c0t3d0s5: is clean. /dev/rdsk/c0t3d0s4: is clean. /dev/rdsk/c0t3d0s7: is clean. /dev/rdsk/c0t3d0s3: is clean. add net default: gateway ICCFP1 NIS domainname is kek.jp starting rpc services: rpcbind keyserv done. Setting netmask of hme0 to 255.255.248.0 Setting default interface for multicast: add net 224.0.0.0: gateway onl50t syslog service starting. Print services started. starting Kana-Kanji converters: cssd. volume management starting. Wnn6: Key License Server started.... Nihongo Multi Client Server (Wnn6 R2.30) Finished Reading Files The system is ready. onl50t console login: onlsun1[101]% rlogin onl50t Last login: Fri May 21 14:21:00 from onlsun1 Sun Microsystems Inc. SunOS 5.6 Generic August 1997 onl50t% onl50t% prtconf System Configuration: Sun Microsystems sun4u Memory size: 256 Megabytes System Peripherals (Software Nodes): FORCE,CPU-50 packages (driver not attached) terminal-emulator (driver not attached) deblocker (driver not attached) obp-tftp (driver not attached) disk-label (driver not attached) ufs-file-system (driver not attached) cdfs (driver not attached) SUNW,builtin-drivers (driver not attached) sun-keyboard (driver not attached) busnet-demo (driver not attached) ufs-file-system (driver not attached) chosen (driver not attached) openprom (driver not attached) client-services (driver not attached) options, instance #0 aliases (driver not attached) memory (driver not attached) virtual-memory (driver not attached) pci, instance #0 pci, instance #0 network, instance #0 pci, instance #0 MEGATEK,ecl (driver not attached) scsi, instance #0 disk (driver not attached) tape (driver not attached) sd, instance #0 (driver not attached) sd, instance #1 (driver not attached) sd, instance #2 (driver not attached) sd, instance #3 (driver not attached) sd, instance #4 (driver not attached) sd, instance #5 (driver not attached) sd, instance #6 (driver not attached) sd, instance #7 (driver not attached) sd, instance #8 (driver not attached) sd, instance #9 (driver not attached) sd, instance #10 (driver not attached) sd, instance #11 (driver not attached) sd, instance #12 (driver not attached) sd, instance #13 (driver not attached) sd, instance #14 (driver not attached) ebus, instance #0 auxio (driver not attached) power, instance #0 (driver not attached) SUNW,pll (driver not attached) se, instance #0 su, instance #0 su, instance #1 ecpp, instance #0 (driver not attached) fdthree, instance #0 (driver not attached) eeprom (driver not attached) sysconfig, instance #0 (driver not attached) flashprom, instance #0 (driver not attached) SUNW,CS4231, instance #0 (driver not attached) network, instance #1 scsi, instance #1 disk (driver not attached) tape (driver not attached) sd, instance #15 (driver not attached) sd, instance #16 (driver not attached) sd, instance #17 (driver not attached) sd, instance #18 sd, instance #19 (driver not attached) sd, instance #20 (driver not attached) sd, instance #21 (driver not attached) sd, instance #22 (driver not attached) sd, instance #23 (driver not attached) sd, instance #24 (driver not attached) sd, instance #25 (driver not attached) sd, instance #26 (driver not attached) sd, instance #27 (driver not attached) sd, instance #28 (driver not attached) sd, instance #29 (driver not attached) vme, instance #0 busnet (driver not attached) SUNW,UltraSPARC-IIi (driver not attached) pseudo, instance #0 onl50t% onl50t% ls /dev arp ptyp6 rsd18e term ttyra audio ptyp7 rsd18f ticlts ttyrb audioctl ptyp8 rsd18g ticots ttyrc bd.off ptyp9 rsd18h ticotsord ttyrd be ptypa rsd21a tnfctl ttyre ccv ptypb rsd21b tnfmap ttyrf conslog ptypc rsd21c tod udp console ptypd rsd21d tty vme16d16 cua ptype rsd21e ttya vme16d32 dsk ptypf rsd21f ttyb vme24d16 dump ptyq0 rsd21g ttyp0 vme24d32 ecpp0 ptyq1 rsd21h ttyp1 vme32d16 es ptyq2 rsr0 ttyp2 vme32d32 fbs ptyq3 rts ttyp3 vmecrcsrd16 fd ptyq4 sad ttyp4 vmecrcsrd32 hme ptyq5 sd18a ttyp5 vmectl icmp ptyq6 sd18b ttyp6 vmedma16d16 ie ptyq7 sd18c ttyp7 vmedma16d32 ip ptyq8 sd18d ttyp8 vmedma24blt ipd ptyq9 sd18e ttyp9 vmedma24d16 ipdcm ptyqa sd18f ttypa vmedma24d32 ipdptp ptyqb sd18g ttypb vmedma24mblt isdn ptyqc sd18h ttypc vmedma32blt kbd ptyqd sd21a ttypd vmedma32d16 kkcv ptyqe sd21b ttype vmedma32d32 kmem ptyqf sd21c ttypf vmedma32mblt kstat ptyr0 sd21d ttyq0 vmedma32te ksyms ptyr1 sd21e ttyq1 vmedvma24 le ptyr2 sd21f ttyq2 vmedvma2432 ledc ptyr3 sd21g ttyq3 vmedvma32 llc1 ptyr4 sd21h ttyq4 vmefdma16d16 lockstat ptyr5 se_hdlc ttyq5 vmefdma16d32 log ptyr6 se_hdlc0 ttyq6 vmefdma24blt logindmux ptyr7 se_hdlc1 ttyq7 vmefdma24d16 md ptyr8 sevseg ttyq8 vmefdma24d32 mem ptyr9 sound ttyq9 vmefdma24mblt mouse ptyra sp ttyqa vmefdma32blt null ptyrb sprom1 ttyqb vmefdma32d16 openprom ptyrc sprom2 ttyqc vmefdma32d32 pcmcia ptyrd sprom3 ttyqd vmefdma32mblt pm ptyre sprom4 ttyqe vmefdma32te printers ptyrf sr0 ttyqf vmepam1d16 profile qe stderr ttyr0 vmepam1d32 ptmajor qfe stdin ttyr1 vmepam2d16 ptmx rawip stdout ttyr2 vmepam2d32 pts rdsk swap ttyr3 volctl ptyp0 rmt syscon ttyr4 winlock ptyp1 rotsw systty ttyr5 wscons ptyp2 rsd18a tcp ttyr6 zero ptyp3 rsd18b tempr1 ttyr7 ptyp4 rsd18c tempr2 ttyr8 ptyp5 rsd18d temprc ttyr9 onl50t% ok. vme を認識できた。 FRCvme のインストールは正常にできている。 onl50t# ifconfig -a lo0: flags=849 mtu 8232 inet 127.0.0.1 netmask ff000000 hme0: flags=863 mtu 1500 inet 130.87.217.131 netmask fffff800 broadcast 130.87.223.255 ether 0:80:42:b:a4:6b onl50t# netstat -rn Routing Table: Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 130.87.216.0 130.87.217.131 U 3 88 hme0 224.0.0.0 130.87.217.131 U 3 0 hme0 default 130.87.216.1 UG 0 665 127.0.0.1 127.0.0.1 UH 0 6 lo0 onl50t# netstat -r Routing Table: Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- Tokyo-Titech.kek.jp onl50t U 3 88 hme0 BASE-ADDRESS.MCAST.NET onl50t U 3 0 hme0 default ICCFP1 UG 0 665 localhost localhost UH 0 6 lo0 onl50t# (4). システム情報をチェック (4-1). pkginfo を実行 onl50t# pkginfo | grep FRC system FRCctrl sysconfig driver SPARC/CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50/CPCI-52x system FRCflash Flash Memory Driver CPU-3CE,5CE,5TE,5V,5VT,7V,8VT,10,20Vx,24VT,50x,52x Solaris 2.5, 2.5.1, 2.6 system FRCvme VMEbus Driver CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50 Solaris 2.5,2.5.1,2.6 onl50t# onl50t# pkginfo -l FRCvme PKGINST: FRCvme NAME: VMEbus Driver CPU-3CE,5CE,5TE,5V,7V,8V,20V,24V,50 Solaris 2.5,2.5.1,2.6 CATEGORY: system ARCH: sparc.force VERSION: V2.3.1 BASEDIR: / VENDOR: FORCE COMPUTERS GmbH DESC: Drivers for accessing the VMEbus PSTAMP: Triton980810174301 INSTDATE: May 19 1999 10:04 STATUS: completely installed FILES: 137 installed pathnames 41 directories 41 executables 8855 blocks used (approx) onl50t# onl50t# pkginfo -l FRCflash PKGINST: FRCflash NAME: Flash Memory Driver CPU-3CE,5CE,5TE,5V,5VT,7V,8VT,10,20Vx,24VT,50x,52x Solaris 2.5, 2.5.1, 2.6 CATEGORY: system ARCH: sparc.force VERSION: V1.1.1 BASEDIR: / VENDOR: FORCE COMPUTERS GmbH DESC: Driver for accessing flash memory devices PSTAMP: Eros980319155049 INSTDATE: May 19 1999 10:13 STATUS: completely installed FILES: 63 installed pathnames 4 shared pathnames 22 directories 11 executables 1666 blocks used (approx) onl50t# (4-2). prtconf を実行 onl50t# prtconf -v System Configuration: Sun Microsystems sun4u Memory size: 256 Megabytes System Peripherals (Software Nodes): FORCE,CPU-50 System properties: name length <4> value <0x00000001>. name length <4> value <0x00001fff>. name length <4> value <0x00002000>. name length <4> value <0x00002000>. packages (driver not attached) terminal-emulator (driver not attached) deblocker (driver not attached) obp-tftp (driver not attached) disk-label (driver not attached) ufs-file-system (driver not attached) cdfs (driver not attached) SUNW,builtin-drivers (driver not attached) sun-keyboard (driver not attached) busnet-demo (driver not attached) ufs-file-system (driver not attached) chosen (driver not attached) openprom (driver not attached) client-services (driver not attached) options, instance #0 System properties: name length <36> value <0x0000250200001805000000bd00008a3b031c7f150400000011131a19120f171600000000>. aliases (driver not attached) memory (driver not attached) virtual-memory (driver not attached) pci, instance #0 Register Specifications: Bus Type=0x1fe, Address=0x0, Size=10000 Bus Type=0x1fe, Address=0x1000000, Size=100 Range Specifications: Ch: 00,00000000 Pa: 00,000001fe, Sz: 1000000 Ch: 00,01000000 Pa: 1000000,00000000, Sz: 0 Ch: 1fe,02000000 Pa: 00,01000000, Sz: 2000000 Ch: 00,00000000 Pa: 1ff,00000000, Sz: 1 Ch: 00,03000000 Pa: 00,00000000, Sz: 1ff Interrupt Specifications: Interrupt Priority=0xe (ipl 14), vector=0x7f0 (2032) Interrupt Priority=0xe (ipl 14), vector=0x7ee (2030) Interrupt Priority=0xe (ipl 14), vector=0x7ef (2031) Interrupt Priority=0xe (ipl 14), vector=0x7e5 (2021) pci, instance #0 Driver properties: name length <4> value <0x70636900>. Hardware properties: name length <4> value <0x00000010>. network, instance #0 Driver properties: name length <4> value <0x00000050>. name length <4> value <0x00000010>. name length <4> value <0x00000001>. name length <4> value <0x00001001>. name length <4> value <0x0000108e>. name length <40> value <0x00010900000000000000000000000000000000000201091000000000000000000000000000007020>. Interrupt Specifications: Interrupt Priority=0x6 (ipl 6), vector=0x7c2 (1986) pci, instance #0 Driver properties: name length <4> value <0x70636900>. name length <4> value <0x00000028>. name length <4> value <0x00000010>. name length <4> value <0x00000024>. name length <4> value <0x00001011>. name length <20> value <0x0001100000000000000000000000000000000000>. MEGATEK,ecl (driver not attached) scsi, instance #0 Driver properties: name length <4> value <0x000007f8>. name length <4> value <0x0000000a>. name length <4> value <0x00000002>. name length <4> value <0x00000bb8>. name length <4> value <0x00000088>. name length <4> value <0x00000010>. name length <4> value <0x00000001>. name length <4> value <0x0000000f>. name length <4> value <0x00001000>. name length <80> value <0x0001200000000000000000000000000000000000010120100000000000000000000000000000010002012014000000000000000000000000000001000201201800000000000000000000000000001000>. Interrupt Specifications: Interrupt Priority=0x4 (ipl 4), vector=0x7c1 (1985) disk (driver not attached) tape (driver not attached) sd, instance #0 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000000>. sd, instance #1 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000001>. sd, instance #2 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000002>. sd, instance #3 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000003>. sd, instance #4 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000004>. sd, instance #5 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000005>. sd, instance #6 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000006>. sd, instance #7 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000008>. sd, instance #8 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000009>. sd, instance #9 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000a>. sd, instance #10 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000b>. sd, instance #11 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000c>. sd, instance #12 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000d>. sd, instance #13 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000e>. sd, instance #14 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000f>. ebus, instance #0 Hardware properties: name length <4> value <0x00000010>. auxio (driver not attached) power, instance #0 (driver not attached) SUNW,pll (driver not attached) se, instance #0 Interrupt Specifications: Interrupt Priority=0xc (ipl 12), vector=0x2b (43) su, instance #0 Interrupt Specifications: Interrupt Priority=0xc (ipl 12), vector=0x29 (41) su, instance #1 Interrupt Specifications: Interrupt Priority=0xc (ipl 12), vector=0x2a (42) ecpp, instance #0 (driver not attached) fdthree, instance #0 (driver not attached) eeprom (driver not attached) sysconfig, instance #0 (driver not attached) flashprom, instance #0 (driver not attached) SUNW,CS4231, instance #0 (driver not attached) network, instance #1 Hardware properties: name length <4> value <0x00000010>. Interrupt Specifications: Interrupt Priority=0x6 (ipl 6), vector=0x21 (33) scsi, instance #1 Driver properties: name length <4> value <0x00000001>. name length <4> value <0x00000000>. name length <4> value <0x00004e20>. name length <4> value <0x000007f8>. name length <4> value <0x0000000a>. name length <4> value <0x00000002>. name length <4> value <0x00000bb8>. Hardware properties: name length <4> value <0x00000010>. Interrupt Specifications: Interrupt Priority=0x4 (ipl 4), vector=0x20 (32) disk (driver not attached) tape (driver not attached) sd, instance #15 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000000>. sd, instance #16 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000001>. sd, instance #17 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000002>. sd, instance #18 System properties: name length <4> value <0x00000000>. name length <4> value <0x00000003>. Driver properties: name length <21> value <0x6e656564732d73757370656e642d726573756d6500>. name length <0> -- . sd, instance #19 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000004>. sd, instance #20 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000005>. sd, instance #21 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000006>. sd, instance #22 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000008>. sd, instance #23 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x00000009>. sd, instance #24 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000a>. sd, instance #25 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000b>. sd, instance #26 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000c>. sd, instance #27 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000d>. sd, instance #28 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000e>. sd, instance #29 (driver not attached) System properties: name length <4> value <0x00000000>. name length <4> value <0x0000000f>. vme, instance #0 System software properties: name length <8> value <0x0000001000000011>. Interrupt Specifications: Interrupt Priority=0xd (ipl 13), vector=0x7c0 (1984) Interrupt Priority=0x600c30e0 (ipl 0), vector=0x7c0 (1984) Interrupt Priority=0x7c8 (ipl 8) Interrupt Priority=0x7c8 (ipl 8), vector=0x9 (9) Interrupt Priority=0x0 (ipl 0), vector=0x600c30e0 (1611411680) Interrupt Priority=0x7 (ipl 7), vector=0x7ca (1994) Interrupt Priority=0x600c30e0 (ipl 0), vector=0x7ca (1994) Interrupt Priority=0x7cb (ipl 11) busnet (driver not attached) SUNW,UltraSPARC-IIi (driver not attached) pseudo, instance #0 onl50t# (4-3). sysinfo を実行 onl50t# /net/onlsun1/home3/local/bin/sysinfo GENERAL INFORMATION Host Name : onl50t Host Aliases : Host Address(es) : 130.87.217.131 Host ID : 808c146b Serial Number : 9180267 Manufacturer : Sun (Sun Microsystems) System Model : CPU 50 Main Memory : 248 MB Virtual Memory : ROM Version : CPU Type : sparc Number of CPUs : 1 App Architecture : sparc Kernel Architecture : sun4u OS Name : SunOS OS Version : 5.6 Kernel Version : SunOS Release 5.6 Version Generic_105181-05 [UNIX(R) System V Release 4.0] Segmentation Fault (core dumped) onl50t# rm core onl50t# sysinfo をコンパイルし直さないと UltraSPARC では実行できないようだ。 (4-4). messages "boot -r" を実行した時の /var/adm/messages のチェック。 onl50t% cat /var/adm/messages Jun 2 10:16:29 onl50t unix: cpu0: SUNW,UltraSPARC-IIi (upaid 0 impl 0x12 ver 0x13 clock 300 MHz) Jun 2 10:16:29 onl50t unix: SunOS Release 5.6 Version Generic_105181-05 [UNIX(R) System V Release 4.0] Jun 2 10:16:29 onl50t unix: Copyright (c) 1983-1997, Sun Microsystems, Inc. Jun 2 10:16:29 onl50t unix: mem = 262144K (0x10000000) Jun 2 10:16:29 onl50t unix: avail mem = 255254528 Jun 2 10:16:29 onl50t unix: Ethernet address = 0:80:42:b:a4:6b Jun 2 10:16:29 onl50t unix: root nexus = FORCE,CPU-50(UltraSPARC-IIi 300MHz) Jun 2 10:16:29 onl50t unix: pci0 at root: UPA 0x1f 0x0 Jun 2 10:16:29 onl50t unix: pci0 is /pci@1f,0 Jun 2 10:16:29 onl50t unix: PCI-device: pci@2,1, simba #0 Jun 2 10:16:29 onl50t unix: glm0: Rev. 4 Symbios 53c875 found. Jun 2 10:16:29 onl50t unix: glm0 is /pci@1f,0/pci@2,1/scsi@4 Jun 2 10:16:29 onl50t unix: glm1: Rev. 4 Symbios 53c875 found. Jun 2 10:16:29 onl50t unix: PCI-device: scsi@4, glm #1 Jun 2 10:16:29 onl50t unix: glm1 is /pci@1f,0/scsi@4 Jun 2 10:16:29 onl50t unix: sd18 at glm1: target 3 lun 0 Jun 2 10:16:29 onl50t unix: sd18 is /pci@1f,0/scsi@4/sd@3,0 Jun 2 10:16:29 onl50t unix: Jun 2 10:16:29 onl50t unix: root on /pci@1f,0/scsi@4/disk@3,0:a fstype ufs Jun 2 10:16:29 onl50t unix: PCI-device: ebus@1, ebus #0 Jun 2 10:16:29 onl50t unix: su0 at ebus0: offset 14,3803f8 Jun 2 10:16:29 onl50t unix: su0 is /pci@1f,0/ebus@1/su@14,3803f8 Jun 2 10:16:29 onl50t unix: su1 at ebus0: offset 14,3602f8 Jun 2 10:16:29 onl50t unix: su1 is /pci@1f,0/ebus@1/su@14,3602f8 Jun 2 10:16:29 onl50t unix: keyboard is major <37> minor <0> Jun 2 10:16:29 onl50t unix: mouse is major <37> minor <1> Jun 2 10:16:29 onl50t unix: se0 at ebus0: offset 14,400000 Jun 2 10:16:29 onl50t unix: se0 is /pci@1f,0/ebus@1/se@14,400000 Jun 2 10:16:29 onl50t unix: stdin is major <20> minor <0> Jun 2 10:16:29 onl50t unix: stdout is major <20> minor <0> Jun 2 10:16:29 onl50t unix: SUNW,hme0: CheerIO 2.0 (Rev Id = c1) Found Jun 2 10:16:29 onl50t unix: SUNW,hme0 is /pci@1f,0/pci@2,1/network@1,1 Jun 2 10:16:29 onl50t unix: PCI-device: network@1,1, hme #1 Jun 2 10:16:29 onl50t unix: SUNW,hme1 is /pci@1f,0/network@1,1 Jun 2 10:16:29 onl50t unix: SUNW,hme0: Using Internal Transceiver Jun 2 10:16:29 onl50t unix: SUNW,hme0: 100 Mbps full-duplex Link Up Jun 2 10:16:29 onl50t unix: dump on /dev/dsk/c0t3d0s1 size 268960K Jun 2 10:16:29 onl50t unix: pseudo-device: winlock0 Jun 2 10:16:29 onl50t unix: winlock0 is /pseudo/winlock@0 Jun 2 10:16:29 onl50t unix: pseudo-device: lockstat0 Jun 2 10:16:29 onl50t unix: lockstat0 is /pseudo/lockstat@0 Jun 2 10:16:29 onl50t unix: pseudo-device: vol0 Jun 2 10:16:29 onl50t unix: vol0 is /pseudo/vol@0 Jun 2 10:16:29 onl50t unix: pseudo-device: llc10 Jun 2 10:16:29 onl50t unix: llc10 is /pseudo/llc1@0 Jun 2 10:16:29 onl50t unix: SUNW,CS42310 at ebus0: offset 14,200000 Jun 2 10:16:29 onl50t unix: SUNW,CS42310 is /pci@1f,0/ebus@1/SUNW,CS4231@14,200000 Jun 2 10:16:29 onl50t unix: pci1011,240 is /pci@1f,0/pci@2,1/pci@2 Jun 2 10:16:29 onl50t unix: pseudo-device: pm0 Jun 2 10:16:29 onl50t unix: pm0 is /pseudo/pm@0 Jun 2 10:16:29 onl50t unix: pseudo-device: tod0 Jun 2 10:16:29 onl50t unix: tod0 is /pseudo/tod@0 Jun 2 10:16:29 onl50t unix: pem: no event handler Jun 2 10:16:29 onl50t unix: ecpp0 at ebus0: offset 14,3403bc Jun 2 10:16:29 onl50t unix: ecpp0 is /pci@1f,0/ebus@1/ecpp@14,3403bc Jun 2 10:16:29 onl50t unix: VME: Universe rev. 1 at 0x60854000 Jun 2 10:16:29 onl50t unix: VME: LCA rev. 2 at 0xfffa8000 Jun 2 10:16:29 onl50t unix: FRCvme V2.3.1 VME Nexus ( Universe) Jun 2 10:16:29 onl50t unix: PCI-device: vme@5, VME #0 Jun 2 10:16:29 onl50t unix: vmeplus0 at vme0: vme16d16 0x0 and vme24d16 0x0 and vme32d16 0x0 and vme16d32 0x0 and vme24d32 0x0 and vme32d32 0x0 and space 0x2f offset 0x0 Jun 2 10:16:29 onl50t unix: and space 0x6f offset 0x0 Jun 2 10:16:29 onl50t unix: and space 0x10 offset 0x0 Jun 2 10:16:29 onl50t unix: and space 0x11 offset 0x0 Jun 2 10:16:29 onl50t unix: and space 0x50 offset 0x0 Jun 2 10:16:29 onl50t unix: and space 0x51 offset 0x0 Jun 2 10:16:29 onl50t unix: vmeplus0 is /pci@1f,0/vme@5/vmeplus@2d,0 Jun 2 10:16:29 onl50t unix: vmedma0 at vme0 Jun 2 10:16:29 onl50t unix: vmedma0 is /pci@1f,0/vme@5/vmedma Jun 2 10:16:29 onl50t unix: vmefdma0 at vme0 Jun 2 10:16:29 onl50t unix: vmefdma0 is /pci@1f,0/vme@5/vmefdma Jun 2 10:16:29 onl50t unix: vmedvma0 at vme0 Jun 2 10:16:29 onl50t unix: vmedvma0 is /pci@1f,0/vme@5/vmedvma Jun 2 10:16:29 onl50t unix: vmectl0 at vme0 Jun 2 10:16:29 onl50t unix: vmectl0 is /pci@1f,0/vme@5/vmectl Jun 2 10:16:29 onl50t unix: sysconfig0: LCA is CPU-50/520 Jun 2 10:16:29 onl50t unix: sysconfig0 at ebus0: offset 14,600000 Jun 2 10:16:29 onl50t unix: sysconfig0 is /pci@1f,0/ebus@1/sysconfig@14,600000 Jun 2 10:16:32 onl50t cssd: starting cs00.sh (pid#255) Jun 2 10:16:32 onl50t cssd: starting ccv.sh (pid#256) Jun 2 10:16:32 onl50t cssd: starting kkcv.sh (pid#257) Jun 4 10:06:11 onl50t unix: NOTICE: sysinfo, uid 0: setuid execution not allowed, dev=31c0003 Jun 4 10:08:10 onl50t last message repeated 1 time onl50t% 以上で VMEドライバのインストールを終わる。 次に、camacドライバのインストールを行う。 ---xxxx ここまでやった(継続中) --- (6). セクション (6-1). サブセクション (6-1-1). サブサブセクション