onlsun1# ./fore_install
******************************************************
****                                              ****
****    FORE Systems SBA System Installation      ****
****                                              ****
******************************************************

Uncompressing distribution ...

In order to properly install this distribution, the following
conditions must be true:

    1. This installation must be performed as root.
    2. There must be approximately 3000 KB of free disk space in
       the root filesystem for the installation of the driver.
    3. There must be approximately 2000 KB of free disk space for
       utilities and 300 KB of free disk space for man pages.
    4. There must be an SBA adapter installed.

Proceed?  y

Configuration utilities must be installed in the root filesystem.
Enter the installation directory [/etc/fore]:  

General utilities may be installed in any writable filesystem.
Enter the installation directory [/usr/local/bin]:  

Man pages may be installed in any writable filesystem.
Enter the installation directory [/usr/local/man]:  

Checking the manifest to see if you have a complete distribution...
The distribution is complete.


Enter the name for the FORE ATM interfaces [fa]:  
The interfaces will be called fa.

Installing new files...
     /etc/fore/sba200.ucode1
     /etc/fore/sba200.ucode2
     /etc/fore/sba200e.ucode1
     /etc/fore/sba200e.ucode2
     /etc/fore/ncomm
     /etc/fore/objcopy
     /etc/fore/fore_expr
     /etc/fore/atmarp
     /etc/fore/elconfig
     /usr/local/bin/atmdiag
     /usr/local/bin/atmarp
     /usr/local/bin/cchan
     /usr/local/bin/atmstat
     /usr/local/bin/atmconfig
     /usr/local/bin/cport
     /usr/local/bin/elarp
     /usr/local/bin/cpath
     /usr/local/bin/topology
     /usr/local/bin/elconfig
     /usr/local/bin/asxmon
     /usr/local/bin/adinfo
     /usr/local/bin/looptest
     /usr/local/bin/perl
     /usr/local/man/man4/atm_setbatchsize.4n
     /usr/local/man/man4/atm_listen.4n
     /usr/local/man/man4/atm_close.4n
     /usr/local/man/man4/atm_server_null.4n
     /usr/local/man/man4/atm_client_null.4n
     /usr/local/man/man4/atm_connect_pvc.4n
     /usr/local/man/man4/atm_recvfrom.4n
     /usr/local/man/man4/atm_sendto.4n
     /usr/local/man/man4/atm_bind.4n
     /usr/local/man/man4/atm_bind_pvc.4n
     /usr/local/man/man4/atm_open.4n
     /usr/local/man/man4/atm_unbind_pvc.4n
     /usr/local/man/man4/atm_pvc.4n
     /usr/local/man/man4/atm_recv.4n
     /usr/local/man/man4/atm_intro.4n
     /usr/local/man/man4/atm_connect.4n
     /usr/local/man/man4/atm_getbatchsize.4n
     /usr/local/man/man4/atm_gethostbyname.4n
     /usr/local/man/man4/atm_disconnect_pvc.4n
     /usr/local/man/man4/atm_error.4n
     /usr/local/man/man4/atmio.4n
     /usr/local/man/man4/atm_client_aal4.4n
     /usr/local/man/man4/atm_recv_null.4n
     /usr/local/man/man4/atm_send.4n
     /usr/local/man/man4/atm_send_null.4n
     /usr/local/man/man4/atm_server_aal4.4n
     /usr/local/man/man4/atm_accept.4n
     /usr/local/man/man8/atmstat.8c
     /usr/local/man/man8/cchan.8c
     /usr/local/man/man8/atmarp.8c
     /usr/local/man/man8/cport.8c
     /usr/local/man/man8/elarp.8c
     /usr/local/man/man8/atmdiag.8c
     /usr/local/man/man8/cpath.8c
     /usr/local/man/man8/elconfig.8c
     /usr/local/man/man8/looptest.8c
     /usr/local/man/man8/out
     /usr/local/man/man8/atm_snmpd.8c
     /usr/local/man/man8/atmconfig.8c
     /usr/local/man/man8/topology.8c
     /usr/local/man/man8/asxmon.8c
     /usr/local/man/man8/atm_intro.8c
     /usr/local/man/man5/atm_mibs.5
     /usr/local/man/windex
     /kernel/drv/fore_atm
     /etc/rcS.d/S99rc.sba200
     /etc/rcS.d/S29fore_lanem
done.

Making the following files set group ID to group 3...
     /usr/local/bin/atmarp
     /usr/local/bin/elarp
     /usr/local/bin/elconfig
done.

Modifying a copy of /etc/devlink.tab...

The file /etc/devlink.tab has been correctly modified.
Okay to rename /etc/devlink.tab to /etc/devlink.tab.fore? [n]:  y

Install FORE's SNMP agent? [y]:  

Use the standard UDP ports for SNMP (161/162)? [y]:  

Use ILMI for address registration? [y]:  

Configure Classical IP? [n]: y

Configure virtual interface qaa0 [y]: 

Enter the ATM address for the ARP server for qaa0
 0x47.0005.80.ffe100.0000.f21c.04d2.0020481c04d2.00

Configure virtual interface qaa1 [y]: n

Configure LAN Emulation? [n]: y


======================================================================
                FORE Systems LAN Emulation Configuration
======================================================================



======================================================================

Current client configuration:
======================================================================

LECS ATM address:      "Well-Known"
ELAN:                   "KEK-ELAN1"

======================================================================
~
~
~
~
~
~
~
~
~
~
~
~
~
(END)

Do You Want To Modify Configuration Information? [n]  

Attempting to remove an old driver... done.

Adding the driver to the system... done.

Adding alias 'FORE,fa' for driver 'fore_atm'... done.

The configuration and installation of the new FORE ATM driver has been
completed.  For these changes to take effect, the system must be rebooted.
When the system reboots, a message similar to the following should appear in
the diagnostic messages (in /var/adm/messages, or viewed with 'dmesg'):

     FORE,fa0 at sbus0: SBus slot 1 0x0 SBus level 2 sparc ipl 2

Automatically reboot the system now? [y]: